Use

Characteristics and Advantages

• One component
• Fast drying

Colour

Packaging

Use

Characteristics and Advantages

• One component
• Single Wipe (no wipe-off required)
• Simplified application can lead to time- and cost-savings
• Fast drying
• Suitable for use in a wide temperature range

Colour

Packaging

Use

Characteristics and Advantages

• Sika Cleaner-205 is used to activate non-porous substrates, such as:
• metals
• plastics
• glazed ceramics and
• painted surfaces

Colour

Packaging

Use

Characteristics and Advantages

• Reduces unsatisfactory installations due to silicone oil contamination
• Increases quality and consistency of windshield installations

Colour

Packaging

Use

Characteristics and Advantages

• Residue- and streak-free
• Eliminates spots and removes film
• Dissolves grease, oil, fingerprints and smudges
• Compatible with all Sika adhesives, primers and cleaners

Colour

Packaging

Use

Sika Hand Cleaner replaces shop towels, dry wipes, paper-towels and rags that are constantly used to wipe hands but can not properly clean them. When you do not have access to soap, water, wash basins or sinks, this is the ideal system to keep hands clean. Sika Hand Cleaner is essential for industrial workers bonding and sealing with urethane, and for mechanics, painters, machinists and all other workers exposed to oily soils. Quickly removes tough-to-clean substances including dirt, heavy grease, adhesives, lubricants, oils, ink, tar, wax, caulk sealant, paint and much more.

Characteristics and Advantages

• Works quickly to remove fresh urethane and primer
• Removes small amounts of cured urethane and dried primer other cleaners can't remove
• Works quickly to loosen and dissolve surface and embedded grease, grime and soil
• Hands are left fresh, clean and conditioned by gentle emollients
• No rinsing, drying or residue -- leaves nothing behind but a pleasant fragrance

Colour

Packaging

Use

Sika Primer-210 is used to improve the adhesion of Sikaflex adhesives on many metals, plastics and paint-primed substrates.

Characteristics and Advantages

• Improves adhesion of Sikaflex adhesives on:
• many metals
• plastics and
• paint-primed substrates

Colour

Packaging

Use

Characteristics and Advantages

• Liquid primer for use on a wide variety of glass surfaces
• Improves adhesion to glass and ceramic-coated glass surfaces

Colour

Packaging

Use

Characteristics and Advantages

• Suitable for application to the following substrates:
• Plastics such as acrylics (PMMA), polycarbonate, ABS, etc.
• Paints such as acrylics and alkyd/melamines

Colour

Packaging

Use

Characteristics and Advantages

• Suitable for application to the following substrates:
• Plastics such as GRP, epoxy resins, PVC, ABS, and timber.

Colour

Packaging

Use

Characteristics and Advantages

• For use on:
• soiled surfaces
• painted surfaces
• non-porous substrates

Colour

Packaging

Use

Characteristics and Advantages

• Excellent adhesion to a variety of substrates
• Remains flexible even at low temperatures, and dimensionally stable at high temperatures
• Superior resistance to weathering

Colour

Packaging

Use

To smooth the surface of freshly applied Sikaflex adhesives and sealants. In tested cases, Sika Tooling Agent N has been shown not to affect paint finishes. However, in important cases, we recommend a pre-test in order to evaluate compatibility, especially with fresh and/or water-based paints.

Characteristics and Advantages

• Neutral formula makes it non aggressive to skin
• Doesn't attack paints
• Doesn't wash out or etch freshly-applied sealants and adhesives

Colour

Packaging

Use

SikaFast-3131S is a 10:1, two-part structural adhesive, designed to substitute or complement welding, riveting, clinching and other mechanical fastening techniques used in the manufacturing of transportation vehicles.

Characteristics and Advantages

• High strength
• Fast-setting and -curing
• Spacers for bondline control
• High ductility
• Good damping properties
• Excellent adhesion to a wide variety of substrates with little or no surface preparation

Colour

Packaging

Use

The ADP technology offers a new generation of fast-curing, flexible adhesives designed to substitute welding, riveting, clinching and other mechanical fastening techniques.

Characteristics and Advantages

• Strength development within minutes of application
• Adhesion to wide range of metals and plastics
• High strength
• Gap filling and vibration damping
• Solvent- and acid-free
• Easy to mix and low odour

Colour

Packaging

Dual Cartridge: 250 mL

Use

The ADP technology offers a new generation of fast-curing, flexible adhesives designed to substitute welding, riveting, clinching and other, mechanical fastening techniques.

Characteristics and Advantages

• Strength development within minutes of application
• Adhesion to wide range of metals and plastics
• High strength
• Gap filling and vibration damping
• Solvent- and acid-free
• Easy to mix and low odour
• Approved NSF R2 for incidental food contact

Colour

2-Components - 1 White, 1 Black for Mixed Colour: Grey

Packaging

Dual Cartridge: 50 mL

Use

Sikaflex-2K/MS is used where strong and durable seals are required. It is suitable for sealing windpower components, such as composite blades. It builds strength quickly, bonds well to a variety of materials, requires limited pre-treatment, and offers high, flexible strength. It contains no isocyanates or solvents and is easy to apply.

Characteristics and Advantages

• Builds strength quickly
• Bonds well to a variety of materials
• Limited pre-treatment
• High strength
• Flexible
• Contains no isocyanates or solvents
• Easy application

Colour

Part A: White
Part B: Grey

Packaging

Pail:

• Part A - 20 L
• Part B - 20 L

Use

Sikaflex AT-Connection meets the requirements for all kinds of connection joints,
window and door perimeter joints, joints, facade and metal cladding joints and many
other construction and expansion joints. Ideal sealant for vinyl windows

Characteristics and Advantages

■ Capable of ± 25% joint movement.
■ Good primerless adhesion to most PVC profiles and vinyl.
■ Silicone-free and over-paintable.
■ Good adhesion on porous and non-porous substrates.
■ Primerless adhesion on many substrates.
■ Good UV resistance and colour stability, non-yellowing.
■ Odourless and solvent-free.
■ Very good workability, (low extrusion force, excellent tooling).
■ High mechanical properties.

Colour

White, Black (sausages only)
Concrete Grey (cartridges and sausages)

Packaging

Cartridge: 300 mL
Sausage: 600 mL

Use

■ Designed for all types of joints with maximum depth of 13 mm (1/2 in) and a maximum expansion of 35%.
■ Excellent for small joints and fillets: windows, door frames, reglets, flashing, glazing, and many
construction applications.
■ Suitable for vertical and horizontal joints; readily placeable at 4°C (39°F).
■ Many applications as an elastic adhesive between materials with dissimilar thermal coefficients
of expansion.
■ Submerged conditions such as canal and reservoir joints.
■ Ideal for: Weatherproofing of joints between brickwork, blockwork, masonry, wood and concrete or metal
frames; joints in walls, floors, balconies, around window or door frames: expansion joints; roofing.

Characteristics and Advantages

■ Capable of ± 35% joint movement.
■ Eliminates time, effort, and equipment for mixing, filling cartridges and cleaning of equipment.
■ High elasticity - Cures to a tough, durable, flexible consistency with exceptional cut and tear resistance.
■ Excellent adhesion - Bonds to most construction materials without primer in most cases.
■ Excellent resistance to aging, weathering.
■ Proven in tough climates around the world.
■ Resists fuel, mineral oils, and dilute minerals, plant and animal fats.
■ Odorless, non-staining, can be painted over with water, oil, and rubber-base paints. Since some
paints dry slowly and the surface may remain slightly tacky, a preliminary test is essential.
■ Meets CAN/CGSB 19.13-M87, Classification MCG-2-25-B-N.
■ Meets Federal Specification TT-S-00230C, Type II, Class A.
■ Meets Federal Specification Spec TT-S-00227E
■ Meets ASTM C920 Type S, Grade NS, Class 25.
■ Jet fuel resistant.
■ ANSI/NSF Standard 61 approved for contact with potable water (special order only).
■ Urethane based, suggested by EPA for radon reduction.
■ USDA approved. Chemically acceptable to the U. S. Department of Agriculture for use in meat and
poultry processing areas under federal inspection.
■ Canadian Food Inspection Agency acceptance.
■ Ministère des Transports du Québec acceptance.
■ Product qualified by The Road Authority (TRA).
■ SWRI validated.

Colour

Aluminum Grey, Anodized Grey, Dark Bronze, Limestone, White,
Colonial White, Capitol Tan, Black, Stone, Medium Bronze,
Redwood Tan.

Packaging

Use

Sealing interior and exterior joints, seams and gaps in many applications including HVAC, metal buildings, window perimeters and many other industrial applications.

Sealing of exposed and concealed joints in aluminum, steel, coated metals, wood and other substrates.

Characteristics and Advantages

• Excellent adhesion; bonds to a variety of substrates without primer
• Highly elastic and durable
• May be painted, though pre-testing is essential
• Non-staining, exceptional cut and tear resistance
• Good resistance to weathering and aging
• NSF certified for drinking water and incidental food contact

Colour

White, Aluminum Grey, Black

Packaging

Cartridge: 300 mL
Sausage: 600 mL

Use

For sealing building components that are subject to structural movement; glass to wood, aluminum, and anodized aluminum; between logs in log homes; critical SSR endlaps, exterior joints around roof curbs, roof joints, skylights, smoke vents, air conditioning equipment, curtain walls joints; for installing and sealing window and door perimeters; exterior grain storage bin lap joints and their base to the concrete pad; mullion panels and frame bedding; exposed and concealed aluminum, steel, coated metals and wood joints.

Characteristics and Advantages

• Cures to form a tough, durable elastic material with excellent cut and tear resistance
• Adheres, in most cases, without a primer to aluminum, siliconized polyester painted metals and other metals, glass, wood, tiles, fibre-reinforced plastics and similar materials
• Odourless
• Non-staining
• May be painted
• Excellent resistance to aging, weathering and road salt
• Exhibits good adhesion to aluminum, FRP, steel, wood, GALVALUME, ZINCALUME, and aluminized steel without attacking the metal coating
• High joint movement capability of +100/-50
• AAMA 808-3-92 Verified for Exterior Perimeter Sealing Compounds

Colour

White, Tan

Packaging

Use

Sikaflex-505 UV is suitable for use on a wide variety of substrates, including aluminium, steel, glass, marble, wood and many different types of plastics. Seek advice from plastics manufacturer before using on plastics prone to stress cracking.

Characteristics and Advantages

• Contains no solvents or isocyanates
• Low VOC content
• Excellent adhesion to many substrates including aluminum, steel, glass, marble, wood and many different types of plastic
• Excellent tooling characteristics
• Fast-curing, even at low temperatures
• Highly weather-resistant
• Excellent UV-resistance
• Easily paintable
• Non-yellowing

Colour

White, Grey, Natural Wood; Colour-matched material is available, subject to minimum-quantity order requirements.

Packaging

Use

Sikaflex-511 bonds well to a wide variety of substrates and is suitable for making permanent, high strength elastic adhesive seals. Compatible substrate materials include wood, metals, metal primers and paint coatings (two-part systems), ceramic materials, plastics and glass. Seek manufacturer’s advice before using on transparent materials that are prone to stress cracking.

Characteristics and Advantages

• AAMA 808-3-92 Verified for Exterior Perimeter Sealing Compounds
• Bonds well to a wide variety of substrates without the need for special pre-treatment
• Resistant to UV radiation
• Solvent-free and very low VOC content
• Silicone- and PVC-free
• Isocyanate-free
• High recovery
• Resistant to aging and weathering
• Elastic
• Low odour
• One-part formulation

Colour

White, Black

Packaging

Use

Sikaflex-521 UV bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high bonding strength. Suitable substrate materials are timber, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics. Seek manufacturer’s advice before using on transparent materials that are prone to stress cracking.

Characteristics and Advantages

• Bonds well to a wide variety of substrates without the need for special pre-treatment
• Resistant to UV radiation
• Solvent-free and very low VOC content
• Silicone- and PVC-free
• Isocyanate-free
• High electrical resistance
• Resistant to aging and weathering
• Elastic
• Low odour
• One-part formulation

Colour

White, Light Grey, Black

Packaging

Cartridge: 300 mL
Sausage: 600 mL

Use

Sikaflex-552 is suitable for structural joints that will be subjected to dynamic stresses. Suitable substrate materials are metals, particularly aluminium (including anodized components), sheet steel (including phosphated, chromated and zinc-plated components), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking.

Characteristics and Advantages

• AAMA 805.2-94 certified
• Bonds well to a wide variety of substrates without the need for special pre-treatment
• Resistant to UV radiation
• Resistant to aging and weathering
• Capable of withstanding high dynamic stresses
• Very low VOC content
• Silicone- and PVC-free
• Isocyanate-free
• High recovery
• Elastic
• Low odour

Colour

White, Black

Packaging

Cartridge: 300 mL
Sausage: 400 mL, 600 mL
Drum: 195 L

Use

SikaLastomer copolymer tapes are specifically formulated for sealing bolted lap joints of galvanized and epoxy painted metals. They are also designed for sealing concrete, EPDM rubber sheeting, metal sewer pipes, glass, plastic, polyethylene sheeting and wood.

Characteristics and Advantages

• Very tacky
• Good green strength
• Adheres to a variety of substrates
• Resistance to fungus and mildew growth
• Virtually odourless

Colour

Grey

Packaging

Rolls: 8 x 50 ft per case

Use

Construction
■ Sealing and glazing of windows, doors and skylights.
■ Conventional glazing.
■ Sanitary sealing.
■ Kitchens and bathrooms.
■ Counter tops.
■ HVAC and Plumbing.
■ Roofing.
Industrial
■ Heating and refrigeration units.
■ Form-in-place gaskets.
■ Sealing of truck, trailer and RV components.
■ Marine cabins.
■ Appliance trim.

Characteristics and Advantages

■ May be applied with ease in all seasons and ideal for cold climates.
■ Excellent gunability.
■ Fast curing.
■ Bonds to most substrates without priming including glass, aluminium, fibreglass, tile,
plastic, ceramic, wood, steel and painted metals.
■ Capable of accommodating ± 25% joint movement.
■ Excellent flexibility for dynamic joint movement and dissimilar materials.
■ Anti-microbial (mildew resistant)
■ ANSI/NSF Standard 51 compliant for use in objects destined for contact with
   foodstuffs. Contact Sika Canada for guidance.
■ Meets the requirements of ASTM C920, Type S, Grade NS, Class 25, Use NT, G, A, O.
■ Meets CAN/CGSB 19.13-M87.
■ Meets Federal Specification TT-S-01543A, Class A.

Colour

Clear Translucent, White

Packaging

295 mL (10 US fl. oz) cartridge, 24/case;
197 L (52 US gal.) drum