Products for Agricultural and Construction Vehicles
Sika® Hand Cleaner
Sika Hand Cleaner is a unique, patented, waterless, citrus-scented hand cleaning system combining both a high-quality liquid hand cleaner formula and a heavy-duty, non-scratching abrasive hand-cleaning towel. Sika Hand Cleaner's unique properties work fast to remove fresh urethane and primer, small amounts of cured urethane and dried primer, and loosens and dissolves surface and embedded grease, grime and soil. Hands are left fresh, clean and residue-free, without rinsing or drying.
Use
Sika Hand Cleaner replaces shop towels, dry wipes, paper-towels and rags that are constantly used to wipe hands but can not properly clean them. When you do not have access to soap, water, wash basins or sinks, this is the ideal system to keep hands clean. Sika Hand Cleaner is essential for industrial workers bonding and sealing with urethane, and for mechanics, painters, machinists and all other workers exposed to oily soils. Quickly removes tough-to-clean substances including dirt, heavy grease, adhesives, lubricants, oils, ink, tar, wax, caulk sealant, paint and much more.
Characteristics and Advantages
- Works quickly to remove fresh urethane and primer
- Removes small amounts of cured urethane and dried primer other cleaners can't remove
- Works quickly to loosen and dissolve surface and embedded grease, grime and soil
- Hands are left fresh, clean and conditioned by gentle emollients
- No rinsing, drying or residue -- leaves nothing behind but a pleasant fragrance
Colour
Orange
Packaging
Pail: 72 towels
Sika® Remover-208
Sika Remover-208 is used to remove traces of Sikaflex products as well as for cleaning painted substrates.
Use
Sika Remover-208 can be used to remove uncured excess Sikaflex adhesives or sealants from application tools or soiled surfaces. Sika Remover-208 can also be used to pre-clean strongly contaminated non-porous substrates. Sika Remover-208 can be used to clean painted surfaces prior to bonding. Sika Remover-208 is to be used in accordance with the instructions listed in the "Sika Primer Chart".
Characteristics and Advantages
- For use on:
- soiled surfaces
- painted surfaces
- non-porous substrates
Colour
Transparent
Packaging
Can: 1 L
Drum: 200 L
Sika® Spacer Tape
Sika Spacer Tape is a closed-cell copolymer foam coated on both sides with an aggressive acrylic adhesive system for optimum compatibility to a variety of substrates. Sika Spacer Tape is constructed with a cellular structured foam that is particularly resistant to weathering and water absorption, while providing a superior long-lasting seal.
Use
Designed to join side panels and roofs on buses and truck bodies. It provides an excellent hold between two substrates during the bonding process without the need for clamps and acts as a spacer to maintain the proper joint design thickness.
Characteristics and Advantages
- Excellent adhesion to a variety of substrates
- Remains flexible even at low temperatures, and dimensionally stable at high temperatures
- Superior resistance to weathering
Colour
Black & White
Packaging
Available in a variety of widths and thicknesses.
Sika® Tooling Agent N
Sika Tooling Agent N is a water-based, solvent-free tooling agent for use with Sikaflex adhesives and sealants.
Use
To smooth the surface of freshly applied Sikaflex adhesives and sealants. In tested cases, Sika Tooling Agent N has been shown not to affect paint finishes. However, in important cases, we recommend a pre-test in order to evaluate compatibility, especially with fresh and/or water-based paints.
Characteristics and Advantages
- Neutral formula makes it non aggressive to skin
- Doesn't attack paints
- Doesn't wash out or etch freshly-applied sealants and adhesives
Colour
Clear liquid
Packaging
Can: 1 L
SikaCure®-4900 CA
SikaCure-4900 CA is the approved curing agent for waterborne dispersion adhesives. To provide good visual control of the mixing process, SikaCure-4900 CA is blue. SikaCure-4900 CA increases both the cohesive strength of the adhesive film and its adhesion to the substrate. Simultaneously, there is a significant improvement in cycling exposures (resistance against temperature and humidity).
Use
SikaCure-4900
CA is used as a curing agent for dispersion laminating adhesives, such as SikaSense-4300 FD
CA.
Characteristics and Advantages
- Easy to mix with waterborne dispersion adhesives
- Increased temperature resistance and hydrolytic stability resistance in cycling exposure
- Improves adhesion to difficult substrates
Colour
Blue
Packaging
Can: 200 gm
Pail: 11 kg
Drum: 225 kg
SikaFast-3131S
SikaFast-3131S is a flexible, two-component acrylic adhesive designed to efficiently transfer high loads and evenly distribute stresses. These characteristics distinguish SikaFast-3131S from other acrylic adhesives that claim high strength and elongation. SikaFast-3131S bonds many materials without surface preparation or priming and cures rapidly at room temperature.
Use
SikaFast-3131S is a 10:1, two-part structural adhesive, designed to substitute or complement welding, riveting, clinching and other mechanical fastening techniques used in the manufacturing of transportation vehicles.
Characteristics and Advantages
- High strength
- Fast-setting and -curing
- Spacers for bondline control
- High ductility
- Good damping properties
- Excellent adhesion to a wide variety of substrates with little or no surface preparation
Colour
Adhesive: Straw
Activator: White or Black
Mix: Straw or Black
Packaging
Dual Cartridge: 50 mL, 490 mL
Pails: 17.03 L, 4.5 US gal
Drums: 170.3 L, 45 US gal
SikaFast®-5211
SikaFast-5211 is a fast-curing (3 minute Open Time), flexible 2-component adhesive system. It is based on ADP, Sika’s polymer technology, derived from acrylic chemistry. Uncured, SikaFast-5211 is a pasty, non-sagging, non-flammable material which allows an easy and precise application.
Use
The ADP technology offers a new generation of fast-curing, flexible adhesives designed to substitute welding, riveting, clinching and other mechanical fastening techniques.
Characteristics and Advantages
- Strength development within minutes of application
- Adhesion to wide range of metals and plastics
- High strength
- Gap filling and vibration damping
- Solvent- and acid-free
- Easy to mix and low odour
Colour
2-Components - 1 White, 1 Black for Mixed Colour: Grey
Packaging
Dual Cartridge: 250 mL
SikaFast®-5215
SikaFast-5215 is a fast-curing (5 minute Open Time), flexible 2-component adhesive system. It is based on ADP, Sika’s polymer technology, derived from acrylic chemistry. Uncured, SikaFast-5215 is a pasty, non-sagging, non-flammable material which allows an easy and precise application.
Use
The ADP technology offers a new generation of fast-curing, flexible adhesives designed to substitute welding, riveting, clinching and other, mechanical fastening techniques.
Characteristics and Advantages
- Strength development within minutes of application
- Adhesion to wide range of metals and plastics
- High strength
- Gap filling and vibration damping
- Solvent- and acid-free
- Easy to mix and low odour
- Approved NSF R2 for incidental food contact
Colour
2-Components - 1 White, 1 Black for Mixed Colour: Grey
Packaging
Dual Cartridge: 50 mL
Sikaflex®-2K/MS
Sikaflex-2K/MS is a fast-curing, two-component sealant based on MS polymers. After curing, the sealant forms a permanent elastic joint.
Use
Sikaflex-2K/MS is used where strong and durable seals are required. It is suitable for sealing windpower components, such as composite blades. It builds strength quickly, bonds well to a variety of materials, requires limited pre-treatment, and offers high, flexible strength. It contains no isocyanates or solvents and is easy to apply.
Characteristics and Advantages
- Builds strength quickly
- Bonds well to a variety of materials
- Limited pre-treatment
- High strength
- Flexible
- Contains no isocyanates or solvents
- Easy application
Colour
Part A: White
Part B: Grey
Packaging
Pail:
- Part A - 20 L
- Part B - 20 L
Sikaflex®-221
Sikaflex-221 is a high-quality, multi-purpose, non-sag 1-component, polyurethane sealant that cures on exposure to atmospheric humidity and forms a durable elastomer.
Use
Sikaflex-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are: timber, metals, metal primers, paint coatings (2-C systems), ceramic materials and plastics. Seek manufacturer’s advice before using on transparent and pigmented materials that are prone to stress-cracking.
Characteristics and Advantages
- One-component formulation
- Elastic
- Low odour
- Resistant to aging and weathering exposure
- Non-corrosive
- Can be overpainted
- Can be sanded
Colour
White, Light Grey, Black
Packaging
Cartridge: 300 mL
Sausage: 400 mL, 600 mL
Pail (black only): 23 L, 4.5 US gal
Drum: 195 L, 255 kg
Sikaflex®-222 UV
Sikaflex-222i UV is a 1-component polyurethane joint sealant that cures on exposure to atmospheric humidity and forms a durable elastomer. Sikaflex-222i UV is highly resistant to weathering and UV radiation.
Use
Sikaflex-222i UV, which is specially formulated to be extremely resistant to UV radiation, is designed to be applied on exposed joints like finishing joints on car bodies, glazing and joinery work. Sikaflex-222i UV is a multi-purpose joint sealant, suitable for a wide range of permanent elastic seals. It is suited to substrates such as: metals, plastics, ceramic materials, paints, coatings (2-C systems) and wood-panel products. Seek manufacturer’s advice before using on transparent plastics that are prone to stress-cracking.
Characteristics and Advantages
- One-component formulation
- Extremely resistant to weathering and UV radiation
- Can be sanded
- Bonds well to a wide range of substrates
- Solvent-free
Colour
Black, White, Grey
Packaging
Cartridge (black & white): 300 mL
Sausage (grey): 600 mL
Pail: 23 L
Sikaflex®-252
Sikaflex-252 is a 1-component, moisture-cured, polyurethane adhesive with extremely high thixotropy and high strength. Sikaflex-252 is particularly suited to bonding applications in the manufacture of trucks, trailers and equipment.
Use
Suitable for bonding of: floors (plywood, blandex, wood, metal) to subfloors or metallic frames; all exterior or interior panels, walls, sheets to corners or tubular frames; FRP roofs (vans, cabins); trim mouldings and all kinds of styling elements. Can also be used for sealing, especially for large-dimension joints. Seek manufacturer's advice before using on plastics that are prone to stress cracking.
Characteristics and Advantages
- Bonds and seals at the same time
- One part formulation
- Replaces rivets and mechanical fasteners
- Very high thixotropy for good gap filling properties
- Adhesion to a wide range of substrates
- Short tack-free and curing time
- Non-staining curing process
- Initial load bearing capacity
- Sandable and paintable
- Increases torsional stiffness of final assembly
- Shock/impact resistant. Vibration and sound damping
- Excellent weather and water resistance
- USDA approved for incidental food contact
Colour
White, Black
Packaging
Cartridge: 300 mL
Sausage: 600 mL
Pail: 23 L, 4.5 US gal
Drum: 195 L
Sikaflex®-254 Booster
Sikaflex-254 is a non-sag, 1-component polyurethane adhesive that cures with the aid of Sika Booster (cure accelerator), or, alternatively, on exposure to atmospheric humidity, to form a durable elastomer.
Use
Sikaflex-254 Booster is suitable for structural joints which are exposed to dynamic stresses, where the attainment of high early strength is essential. Sikaflex-254 Booster is ideal to bond large components and assemblies.
Characteristics and Advantages
- One-component formulation with accelerated cure
- Thixotropic
- Good balance between Open Time and Cure speed
- Solvent-free
- Bonds well to wide variety of substrates
- Elastic/gap filling capability
- Can withstand high dynamic stresses
- Sandable and overpaintable
Colour
Black, White
Packaging
Pail: 23 L
Drum: 195 L
Sikaflex®-265 FG
Sikaflex-265 is a high-performance, elastic, gap-filling, one-part polyurethane adhesive that cures on exposure to atmospheric moisture to form a durable elastomer.
Use
Sikaflex-265 is designed for direct glazing applications in both the OEM and repair markets, and is suitable for use with mineral-glass-based windows. Before installing laminated safety glass windshields incorporating heating elements or radio aerials in the PVB sandwich layer, we recommend that you contact Sika’s Technical Service Department for advice.
Because Sikaflex-265 can be tooled to a very fine finish, and because it is specifically designed for enhancing its UV resistance, it is suitable for use in exposed joints.
Characteristics and Advantages
- One-part formulation
- Excellent working characteristics
- Fast cure time and low odour
- High Green Strength
- Excellent Sag Resistance
- Resistant to aging and weathering
- Solvent and PVC-free
Colour
Black
Packaging
Cartridge: 310 mL
Sausage: 600 mL
Sikaflex®-521 UV
Sikaflex-521 UV is a multi-purpose, non-sag, elastic, 1-component sealant based on a polyurethane-hybrid compound, that cures on exposure to atmospheric humidity to form a durable elastomer.
Use
Sikaflex-521 UV bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high bonding strength. Suitable substrate materials are timber, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics. Seek manufacturer’s advice before using on transparent materials that are prone to stress cracking.
Characteristics and Advantages
- Bonds well to a wide variety of substrates without the need for special pre-treatment
- Resistant to UV radiation
- Solvent-free and very low VOC content
- Silicone- and PVC-free
- Isocyanate-free
- High electrical resistance
- Resistant to aging and weathering
- Elastic
- Low odour
- One-part formulation
Colour
White, Light Grey, Black
Packaging
Cartridge: 300 mL
Sausage: 600 mL
Sikaflex®-529
Sikaflex-529 is a multi-functional, sprayable, 1-component polyurethane hybrid sealant for car body assemblies.
Use
Sikaflex-529 is designed for use as an elastic sealant for flush seams and lap joints in vehicle body assemblies. It is suitable for use on metals, both primed and lacquer-finished (2-C paint systems).
Characteristics and Advantages
- One-component hybrid-formulation technology
- Reproduces original factory finish; can be applied by spray or brush; suitable for textured seams
- Seals seams with limited overspray
- Bonds well to a wide range of substrates, no priming necessary
- Clean application with Sika Jetflow-Gun
- Can be overpainted immediately and up to 72 hours after application
- Fast-drying
- Excellent non-sag characteristics
- Good acoustic and mechanical damping properties
- High electrical resistance
- Low odour formulation
Colour
Yellow Ochre
Packaging
Sausage: 300 mL
Drum: 195 L
Sikaflex®-552
Sikaflex-552 is a high-performance, elastic, gap-filling, 1-component structural assembly adhesive that cures on exposure to atmospheric humidity and forms a durable elastomer. Sikaflex-552 does not contain isocyanate.
Use
Sikaflex-552 is suitable for structural joints that will be subjected to dynamic stresses. Suitable substrate materials are metals, particularly aluminium (including anodized components), sheet steel (including phosphated, chromated and zinc-plated components), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking.
Characteristics and Advantages
- AAMA 805.2-94 certified
- Bonds well to a wide variety of substrates without the need for special pre-treatment
- Resistant to UV radiation
- Resistant to aging and weathering
- Capable of withstanding high dynamic stresses
- Very low VOC content
- Silicone- and PVC-free
- Isocyanate-free
- High recovery
- Elastic
- Low odour
Colour
White, Black
Packaging
Cartridge: 300 mL
Sausage: 400 mL, 600 mL
Drum: 195 L
SikaForce®-7780 L05
SikaForce-7780 L05 CA is a two-component, flexible bonding and filling compound which consists of a filled polyol-based resin and an isocyanate-based hardener. The extruded mixture is initially liquid, but attains high non-sag properties after 3 minutes. Due to its rapid cure, it must be applied within the first 2 minutes of mixing. The assembled parts can bear a load soon after, thanks to the high cure speed. The components are processed manually or by means of suitable metering and mixing machines.
Use
SikaForce-7780 L05 CA is a two-component polyurethane, flexible bonding and filling compound. It can be applied by trowel or spatula and provides rigidity as well as flexibility. Application of the product must be achieved within 5 minutes of mixing. It is designed for levelling of floor elements, both in industry and transportation.
Characteristics and Advantages
- Pourable and/or applicable by trowel or spatula
- Processable by metering and mixing machines
- Rapid-curing at room temperature
- Tough, yet flexible
- Can be grinded with low dust emision
- Overpaintable and ages well
Colour
Components: White and Black; Mixed Colour: Grey
Packaging
Dual Cartridge (Resin + Hardener): 490 mL
Drums: 200 L (individual components)
SikaForce®-7780 L12
SikaForce-7780 L12 CA is a two-component, flexible bonding and filling compound which consists of a filled polyol-based resin and an isocyanate-based hardener. The extruded mixture is initially liquid, but attains high non-sag properties after 3 minutes. Due to its rapid cure, it must be applied within the first 9 minutes of mixing. The assembled parts can bear a load soon after, thanks to the high cure speed. The components are processed manually or by means of suitable metering and mixing machines.
Use
SikaForce-7780 L12 CA is a two-component polyurethane, flexible bonding and filling compound. It can be applied by trowel or spatula and provides rigidity as well as flexibility. Application of the product must be achieved within 12 minutes of mixing. It is designed for levelling of floor elements, both in industry and transportation.
Characteristics and Advantages
- Pourable and/or applicable by trowel or spatula
- Processable by metering and mixing machines
- Rapid curing at room temperature
- Tough, yet flexible
- Can be grinded with low dust emision
- Overpaintable and ages well
Colour
Components: White and Black; Mixed Colour: Grey
Packaging
Dual Cartridge (Resin + Hardener): 490 mL
Component A - Resin - Pail: 1 L
Component B - Hardener - Pouch: 100 mL
Kit: 1.1 L
Pails: 20 L
Drums: 200 L
SikaSense®-4300 FD CA
SikaSense-4300 FD CA is a ready-to-use, waterborne PUR dispersion contact adhesive with high initial strength and very good resistance against plasticizers; it offers a short drying time in combination with a very long open time. SikaSense-4300 FD CA, in combination with the curing agent, SikaCure-4900 CA, is a high quality laminating adhesive with especially good resistance to heat and water.
Use
It is used to bond flooring in utility vehicles, interior linings for automobiles, panels, and front parts for furniture in the 3D laminating process. It can be used on: wood, bare or coated metals, GRP, medium-density fibreboard (MDF, manufactured from wood fibres), decorative and foamed foils made of PVC, ABS, ASA, TPO or polyester and also foam-backed textile coverings, carpets and floor covers. In the production of utility vehicles, SikaSense-4300 FD CA is suitable for room-temperature bonding of different covering materials, e.g. PVC flooring, and adjacent stairs, wheel arches, seat brackets and wall coverings.
Characteristics and Advantages
- Easy processing
- Fast Drying
- Long Open-Time
- Solvent-free
- Broad adhesion range on wood, metals and plastics
- High initial strength
- Allows for easy positioning of parts
Colour
White
Packaging
Pail: 4 kg
Drums: 200 kg
