Products for Shotcrete
Sigunit®-49 CA
A caustic- and calcium chloride- free accelerating admixture for dry sprayed concrete (shotcrete)
Use
- Shotcrete of high quality and with high initial strength for general construction work
- Support at the face of tunneling and securing of rock in tunnel construction
- Rock and slope stabilisation along highways and transportation routes
Characteristics and Advantages
- Chloride-free, suitable for steel reinforced shotcrete and substrates.
- Measurable reduction of rebound.
- Improves bond of shotcrete to rock and concrete, making overhead spraying easier.
- No strength loss of the accelerated concrete if used correctly
Colour
Off - whitePackaging
14 kg bagProduct Data Sheet
Sigunit-49 CAMaterial Safety Data Sheet
Sigunit-49 CASigunit® L72 AF
Liquid Alkali-free Shotcrete Accelerator
Use
Sigunit L72 AF is a high performance, alkali-free liquid set accelerator for shotcrete applications
Characteristics and Advantages
Sigunit L72 AF liquid shotcrete set accelerator has the following characteristics and advantages:
- High early strength development
- Alkali and Chloride free
- No pollution of groundwater by leaching of alkalis
- Distinct reduction in rebound
- Improves bond of shotcrete to rock and concrete thus facilitating overhead spraying
- Distinct reduction of dust
Colour
Liquid, translucent to whitePackaging
1040 litre (275 US gal.) tote and bulk deliverySigunit® P1AF
Shotcrete Admixture
Use
Sigunit P1AF is suitable for wet-process shotcreting. The principle applications for Sigunit- P1AF are:
- Support at the face whilst advancing tunnels and mines.
- Rock- and slope stabilisation.
- High quality lining shotcrete.
Characteristics and Advantages
The most outstanding advantages of Sigunit-P1AF shotcrete accelerator are:
- Alkali-free, avoiding additional leaching of alkalis and pollution of ground and surface water.
- When correctly used, marginal reduction of shotcrete strength.
- Reduction of rebound.
- Easier overhead spraying by improved bond of shotcrete to rock and concrete.
- Reduction of dust formation.
- Chloride-free, suitable for steel reinforced shotcrete and substrates.
- Easy to dissolve on site in time for shotcreting.
- Converting powder to liquid on site, the temperature will rise to approx. 40ºC (104ºF); the warm solution will increase the accelerator effect considerably.
- Lower cost of logistics
Colour
White / PowderPackaging
25 kg (55 lb) bagProduct Data Sheet
Sigunit P1AFMaterial Safety Data Sheet
Sigunit P1AF
- Imprint
- Legal Notice
- © Copyright 2013 Sika Group
- + Share this
