Use

• Use on grade, above, and below grade on concrete and mortar.
• Use on horizontal, vertical and overhead surfaces.
• Block filler and skin coats.
• Repair for gouges, broken edges, bugholes, pores, honeycombing.
• Adhesive for insulation materials, lightweight concrete, foam insulation board.

Characteristics and Advantages

• Superior abrasion resistance over conventional cement mortar.
• High bond strength assures superior adhesion.
• Compatible with thermal coefficient of expansion of concrete.
• Easily applied to clean, sound substrates. May be featheredged.
• Good freeze/thaw resistance.
• Increased resistance to de-icing salts.
• Formulated with inert, non-reactive aggregates to eliminate potential Alkali-Aggregate Reactivity (AAR).
• Not a vapour barrier.
• Not flammable.
• Canadian Food Inspection Agency acceptance.
• Ministry of Transport Québec acceptance.
• Product qualified by The Road Authority (TRA).

Colour

Concrete Grey when mixed

Packaging

25 kg (55 lb) unit

Use

• On horizontal surfaces subject to light foot traffic, such as balconies.
• To waterproof concrete drinking water tanks, reservoirs, and clearwells.
• For internal and external, horizontal and vertical water- and damp-proofing of concrete, mortar, blockwork and brickwork.
• For protection of concrete structures against the harmful effects of de-icing salts and freeze/thaw cycles.
• For sealing static hairline cracks in concrete structures not subject to movement.
• For interior and exterior waterproofing of basements.
• To protect rigid, extruded polystyrene foam.

Characteristics and Advantages

• Improves the watertightness of water-containing concrete tanks, reservoirs, and clearwells.
• Protects against water penetration, while being water vapour permeable (breathable).
• Excellent freeze/thaw resistance.
• Good adhesion to sound, prepared substrates.
• Mixing and application is fast and easy.
• Good abrasion resistance.
• Protects against concrete carbonation; 2 mH25m (80 mils) of SikaTop Seal 107^CA is equivalent to 150 mm (6 in) of concrete.
• Formulated with inert, non-reactive aggregates to eliminate potential Alkali-Aggregate Reactivity (AAR).
• Can be mixed to slurry or trowelable consistency.
• Improves concrete/masonry appearance.
• NSF/ANSI Standard 61 approved for potable water (special order only).

Colour

Concrete Grey

Packaging

18 kg (39.6 lb) kit
Yields 9 L (2.4 US gal.) of slurry