Use

• On grade, above and below grade on concrete and mortar.
• On horizontal surfaces.
• On structural repair of concrete.
• As a structural grout for base plates up to 600 mm x 600 mm.
• For patching and overlays where a highly chemical resistant mortar is required.
• For patching concrete structures, roadways, bridge decks, joint headers and floors.

Characteristics and Advantages

• High early-strength.
• High compressive strength.
• High flexural strength.
• High chemical resistance.
• Applicable down to -10°C (14°F) (Regular).
• Applicable down to -25°C (-13°F) (Sub-Zero).
• Easy, on-site batching.
• Not flammable.
• Not a vapour barrier.
• Low odour.
• No priming required for most applications.
• Canadian Food Inspection Agency acceptance for freezer floors.
• Ministry of Transport Québec acceptance.

Colour

Grey

Packaging

Component A: 3 L (0.8 US gal.) jug
Component B: 21.9 kg (48 lb) bag
Sub-Zero Component: 575 mL (19 oz) can

Use

• To repair horizontal concrete surfaces, such as bridge decks, expansion joint nosings, airport runways and taxiways, ramps and walkways.
• On grade and above grade on concrete and mortar.
• To repair freezer floors, loading docks and similarly exposed locations where quick curing and return to service are required.

Characteristics and Advantages

• Factory proportioned, self-contained kit with easy to use, 1:1 mix ratio.
• Very easy and fast to apply; can be easily finished.
• Excellent bond strength to prepared concrete, without primer.
• High early strength values and rapid development of ultimate strengths.
• Thermally compatible with concrete.
• Open to traffic in 15 minutes at 23°C (73°F).
• Can be applied down to and cures at -28°C (-20°F).

Colour

Brown Grey

Packaging

Self-contained; 12.7 L (0.45 ft³) kit
Component A (Resin): 1.9 L (0.5 US gal.) approx.
Component B (Hardener): 1.9 L (0.5 US gal.) approx.
Component C (Aggregate): 18 kg (40 lb) approx.

Use

• For fast turnaround of heavy industrial floor and containment areas in aggressive environments i.e. metal refining, pulp and paper, chemical plants, waste incinerators.
• Ideal as expansion joint nosing material and bridge repair system (Sikadur VPC provides excellent abrasionresistance and thermal compatibility with concrete).
• For rail base pads, tower bases and structural repair work (Sikadur VPC can be placed down to -20°C (-4°F) and provides a fast cure at sub-zero temperatures).

Characteristics and Advantages

• Sikadur VPC is fast to cure, reaching high strength within a few hours.
• May be poured or troweled into place.
• Sikadur VPC may be placed at temperatures as low as -40°C (-40°F). It cures as the temperature reaches -20°C (-4°F). It may be placed on frozen dry surfaces.
• Sikadur VPC will stick to damp rocks or concrete at above freezing temperatures. Best results are obtained by drying the substrate.
• Tests conducted by Ontario Hydro verify that Sikadur VPC has better resistance to creep than well-cured 30 MPa (4350 psi) concrete when tested at 23°C (73°F). At 38°C (100°F), the creep resistance of both materials is similar.
• Sikadur VPC has high chemical resistance to a wide variety of acids, alkalies and salts as it is based on vinyl ester resin technology.
• Ministry of Transport Québec acceptance.

Colour

Grey

Packaging

Component A (Resin):9 L (2.4 US gal.) pail
Component B (Benzoyl Peroxide): 280 g (9.9 oz) jar
Sikadur Aggregate 8:
(aggregate:resin by weight)
13:1 - 6 x 20 kg (44 lb)
15:1 - 7 x 20 kg (44 lb)
17:1 - 8 x 20 kg (44 lb)

Use

• Use on grade, above and below grade on concrete.
• Highway overlays and repairs.
• Structural repair material for concrete roadways, parking structures, bridges, dams and ramps.
• Full depth patching repairs.
• Horizontal repairs of concrete and mortar.

Characteristics and Advantages

• Specifically suited for hot weather applications when extended working time is required.
• Rapid hardening as defined by ASTM C928.
• Can be used with Sikacem Accelerator for cold conditions, increased early strengths and reduced curing time.
• Compatible with Sikafloor, SikaBond, and Sika AcouBond systems.
• Allows application of an epoxy coating within 6 hours.
• Freeze/thaw resistant.
• Easy to use; economical patching and labour saving material.
• Contains no added chlorides.
• Formulated with inert, non-reactive aggregates to eliminate potential Alkali-Aggregate Reactivity (AAR).
• Open to foot traffic in 4 hours, to vehicle traffic in 6 hours [23°C (73°F)].
• Easily applied to clean, sound substrates.
• Not a vapour barrier.
• Canadian Food Inspection Agency acceptance.

Colour

Concrete Grey

Packaging

25 kg (55 lb) bag

Use

• Use on grade, above and below grade on concrete.
• Highway overlays and repairs.
• Structural repair material for concrete roadways, parking structures, bridges, dams and ramps.
• Full depth patching repairs.
• Horizontal repairs of concrete and mortar.

Characteristics and Advantages

• Very rapid hardening as defined by ASTM C928.
• Can be used with Sikacem Accelerator for cold conditions, increased early strengths and reduced curing time.
• Compatible with Sikafloor, SikaBond, and Sika AcouBond systems.
• Allows application of an epoxy coating within 4 hours.
• Freeze/thaw resistant.
• Easy to use; economical patching and labour saving material.
• Contains no added chlorides.
• Formulated with inert, non-reactive aggregates to eliminate potential Alkali-Aggregate Reactivity (AAR).
• Open to foot traffic in 45 minutes, to vehicle traffic in 1 hour [23°C (73°F)].
• Easily applied to clean, sound substrates.
• Not a vapour barrier.
• Canadian Food Inspection Agency acceptance.

Colour

Concrete Grey

Packaging

25 kg (55 lb) bag

Use

• Bridge deck and highway overlays and repairs.
• Concrete joint repairs.
• Structural repair to concrete parking structures, dams.
• Full depth patching repairs.
• Horizontal repairs of concrete and mortar.
• Formed wall and marine structure repairs.

Characteristics and Advantages

• Very rapid hardening as defined by ASTM C928.
• Freeze/thaw resistant.
• Easy to use; economical patching and labour saving material.
• Contains no added chlorides.
• Not gypsum-based.
• High early-strength.
• Fast-setting.
• Open to foot traffic in 45 minutes, to vehicle traffic in 1 hour at 23°C (73°F).
• Easily applied to clean, sound substrates.
• Not a vapour barrier.
• Conforms with Alberta Transportation type HEH mortar.
• Ministère des Transports du Québec acceptance.
• Ministry of Transport Ontario acceptance.
• Product qualified by The Road Authority (TRA).

Colour

Concrete Grey

Packaging

22.7 kg (50 lb) bag

Use

• Seal leaks or makes quick masonry or concrete repairs.
• Floors, walls, sidewalks.
• For fast repair of pipe and other precast concrete products.
• Excellent for sewage and water treatment plant maintenance and repair.

Characteristics and Advantages

• Ready to use powder requires only addition of water.
• Sets rapidly even when mix water temperature is at 4°C (39°F) and ambient temperature is at 2°C (35°F).
• Low-shrinkage Sikaset Plug is highly resistant to sewage and sulfate attack.

Colour

Concrete Grey

Packaging

2.5 kg (5.5 lb) pail, 5 kg (11 lb) bag, 25 kg (55 lb) pail