Industrial and Decorative Flooring

Products for ESD Control Flooring Systems

  • Sikafloor® 100 ESD

    Conductive, Carbon Black-Filled Epoxy Intermediate Coating for Use with Sikafloor Electrostatic Discharge (ESD) Systems

    Show Details
     

    Use

    • Semi-conductor and circuit board production rooms.
    • Electronic manufacturing, calibration and repair facilities.
    • Computer storage and data processing areas.
    • Military premises.
    • Aircraft hangers.
    • Aerospace industries.
    • Pharmaceutical plants.
    • Hospitals and testing laboratories.
    • Explosion hazard areas (gas, vapour, spray or fine dust).

    Characteristics and Advantages

    • Consistent resistance measurements are obtained when tested at 10 to 100 volts.
    • Meets EOS/ESD Standard 7.1 for conductive and static dissipative coatings.
    • Dissipates a 5000 volt charge to zero in less than 0.1 seconds (@ (22°C [72°F] & 12% R.H.).
    • Maintains performance over the wear life of the Sikafloor ESD coating.
    • Maintains electrical conductivity throughout the entire thickness of the floor system.
    • Not dependant on relative humidity for conductivity properties.

    Colour

    Black

    Packaging

    15.9 L (4.2 US gal.) kit - packaged as
    Part R 1 x 13.06 L (3.45 US gal.) in part filled 18.9 L (5 US gal.) pail
    Part H 1 x 2.84 L (0.75 US gal.) in part filled 3.78 L (1 US gal) can

    Product Data Sheet

    Sikafloor 100 ESD

    Material Safety Data Sheet

    Sikafloor 100 ESD

  • Sikafloor® 200 ESD and Sikafloor® 200C ESD

    High-Build, Smooth Finish and Static Dissipative or Conductive Epoxy Coatings for Electrostatic Discharge (ESD) Flooring Systems

    Show Details
     

    Use

    • Semi-conductor and circuit board production rooms.
    • Electronic manufacturing, calibration and repair facilities.
    • Computer storage and data processing areas.
    • Military premises.
    • Aircraft hangers.
    • Aerospace industries.
    • Pharmaceutical plants.
    • Hospitals and testing laboratories.
    • Explosion hazard areas (gas, vapour, spray or fine dust).

    Characteristics and Advantages

    • Consistent resistance measurements are obtained when tested at 10 to 500 volts.
    • Less than 15 volts Body Voltage Generation (BVG) when using conductive footwear.
    • Available in ‘static dissipative’ range (1.0 x 106 to 1.0 x 109 ohms) as per EOS/ESD.
    • Dissipates a 5000 volt charge to zero in less than 0.1 second (22°C [72°F] @ 12% R.H.).
    • Maintain ESD performance over the wear life of the Sikafloor ESD coating.
    • Available in ‘conductive’ range (2.5 x 104 to 1.0 x 106 ohms) as per EOS/ESD.
    • Maintain electrical conductivity throughout the entire thickness of the system.
    • Not dependant on relative humidity for conductivity properties.
    • Produce tough, smooth, non-porous surfaces that are easy to clean and allow repeated washing and decontamination.
    • Low VOC; user and environmentally (air quality) friendly.

    Colour

    Available in 8 standard colours (Refer to Sikafloor ESD Colour Chart)

    Packaging

    13.44 L (3.56 US gal.) kit - packaged as
    Part R 1 x 8.24 L (2.18 US gal.) in part filled 18.9 L (5 US gal.) pail
    Part H 1 x 3.78 L (1 US gal.) packaged in full 3.78 L (1 US gal.) can
    Color Pack 2 x 0.47 L (1 US pint) packaged in full 0.47 L (1 US pint) cans
    ESD Pack 2 x 0.24 L (1/2 US pint) packaged in full 0.24 L (1/2 US pint) cans

    Product Data Sheet

    Sikafloor 200 ESD and Sikafloor 200C ESD

    Material Safety Data Sheet

    Sikafloor 200 ESD and Sikafloor 200C ESD

  • Sikafloor® 700 ESD and Sikafloor® 700C ESD

    High-Build, Smooth Finish and Highly Chemical-Resistant, Static Dissipative or Conductive Novolac Epoxy Coatings for Electrostatic Discharge (ESD) Flooring Systems

    Show Details
     

    Use

    • Electronic manufacturing, calibration and repair facilities.
    • Chemical production and storage areas.
    • Military premises.
    • Aircraft hangers.
    • Aerospace industries.
    • Pharmaceutical plants.
    • Solvent production and storage areas.
    • Oil refineries.
    • Explosion hazard areas (gas, vapour, spray or fine dust).

    Characteristics and Advantages

    • Consistent resistance measurements are obtained when tested at 10 to 500 volts.
    • Less than 15 volts Body Voltage Generation (BVG) when using conductive footwear.
    • Available in static dissipative range (1.0 x 106 to 1.0 x 109 ohms) as per EOS/ESD.
    • Dissipate a 5000 volt charge to zero in less than 0.1 second (22°C [72°F] @ 12% R.H.).
    • Maintain ESD performance over the wear life of the Sikafloor ESD coating.
    • Available in conductive range (2.5 x 104 to 1.0 x 106 ohms) as per EOS/ESD.
    • Maintain electrical conductivity throughout the entire thickness of the system.
    • Not dependant on relative humidity for conductivity properties.
    • Broad spectrum chemical resistance to concentrated acids, caustics and solvents.
    • Excellent wear, abrasion and impact resistance properties.
    • Optional non-skid and non sparking textures are available.H160H159H158H156H154H152
    • Produce tough, smooth, non-porous surfaces that are easy to clean and allow repeated washing and decontamination.
    • Low VOC; user and environmentally (air quality) friendly.

    Colour

    Available in 8 standard colours (Refer to Sikafloor ESD Colour Chart)

    Packaging

    15.21 L (4.02 US gal.) kit - packaged as
    Part R 1 x 11.42 L (3.02 US gal.) in part filled 18.9 L (5 US gal.) pail
    Part H 1 x 2.84 L (0.75 US gal.) in part filled 3.78 L (1 US gal) can
    Color Pack 2 x 0.47 L (1 US pint) in full 0.47 L (1 US pint) cans

    Product Data Sheet

    Sikafloor 700 ESD and Sikafloor 700C ESD

    Material Safety Data Sheet

    Sikafloor 700 ESD and Sikafloor 700C ESD