Use

• On grade, above and below grade on concrete and mortar.
• On horizontal surfaces.
• On structural repair of concrete.
• As a structural grout for base plates up to 600 mm x 600 mm.
• For patching and overlays where a highly chemical resistant mortar is required.
• For patching concrete structures, roadways, bridge decks, joint headers and floors.

Characteristics and Advantages

• High early-strength.
• High compressive strength.
• High flexural strength.
• High chemical resistance.
• Applicable down to -10°C (14°F) (Regular).
• Applicable down to -25°C (-13°F) (Sub-Zero).
• Easy, on-site batching.
• Not flammable.
• Not a vapour barrier.
• Low odour.
• No priming required for most applications.
• Canadian Food Inspection Agency acceptance for freezer floors.
• Ministry of Transport Québec acceptance.

Colour

Grey

Packaging

Component A: 3 L (0.8 US gal.) jug
Component B: 21.9 kg (48 lb) bag
Sub-Zero Component: 575 mL (19 oz) can

Use

• With a 4:1 aggregate/resin ratio, a fluid consistency grout is produced. This design mix produces an anchor grout for bolts or deformed bars in concrete or rock.
• With a 5:1 aggregate/resin ratio, a flowable consistency grout is produced. This rapid set grout can be used for realigning of equipment and machinery, baseplates, soleplates and columns.
• With a 7.5:1 aggregate/resin ratio, can be used to produce a fast set repair mortar in chemical environment, where concrete has eroded or acid brick has failed. It is excellent for horizontal surfaces tanks, bases and containment areas.

Characteristics and Advantages

• Will cure at temperatures below freezing.
• Can be used at different aggregate loading to produce flowable or trowel grade mortars.
• Sikadur LT Grout is very chemically resistant to a wide variety of acids, alkalies and salts.
• Sikadur LT Grout may be placed at temperatures as low as -40°C (-40°F). It cures as the temperature reaches -20°C (-4°F).
• Ministry of Transport Québec acceptance.

Colour

Grey

Packaging

Component A (Resin): 3.75 L (1 US gal.) pail
Component B (Hardener): 125 g (4.4 oz) jar

Sikadur Aggregate 3:
4:1 - 16 kg (35 lb) (4/5 bag)
5:1 - 20 kg (44 lb) (1 bag)
7.5:1 - 30 kg (66 lb) (1 1/2 bag)

Sikadur Aggregate 8:
5:1 - 20 kg (44 lb) (1 bag)

Use

• For fast turnaround of heavy industrial floor and containment areas in aggressive environments i.e. metal refining, pulp and paper, chemical plants, waste incinerators.
• Ideal as expansion joint nosing material and bridge repair system (Sikadur VPC provides excellent abrasionresistance and thermal compatibility with concrete).
• For rail base pads, tower bases and structural repair work (Sikadur VPC can be placed down to -20°C (-4°F) and provides a fast cure at sub-zero temperatures).

Characteristics and Advantages

• Sikadur VPC is fast to cure, reaching high strength within a few hours.
• May be poured or troweled into place.
• Sikadur VPC may be placed at temperatures as low as -40°C (-40°F). It cures as the temperature reaches -20°C (-4°F). It may be placed on frozen dry surfaces.
• Sikadur VPC will stick to damp rocks or concrete at above freezing temperatures. Best results are obtained by drying the substrate.
• Tests conducted by Ontario Hydro verify that Sikadur VPC has better resistance to creep than well-cured 30 MPa (4350 psi) concrete when tested at 23°C (73°F). At 38°C (100°F), the creep resistance of both materials is similar.
• Sikadur VPC has high chemical resistance to a wide variety of acids, alkalies and salts as it is based on vinyl ester resin technology.
• Ministry of Transport Québec acceptance.

Colour

Grey

Packaging

Component A (Resin):9 L (2.4 US gal.) pail
Component B (Benzoyl Peroxide): 280 g (9.9 oz) jar
Sikadur Aggregate 8:
(aggregate:resin by weight)
13:1 - 6 x 20 kg (44 lb)
15:1 - 7 x 20 kg (44 lb)
17:1 - 8 x 20 kg (44 lb)