Use

• Can be used to stop water under a hydrostatic head and provide a resilient tough and flexible, closed cell polyurethane grout.
• Cracks in tanks, tunnels, pipes, basements, pools, subways or any structure where water intrusion must be stopped.

Characteristics and Advantages

• The final cured product is a non-toxic rubber foam similar to that used in shoe soles.
• High bond strength even to damp surfaces.
• Flexible and easy to use.
• Waterproofs and seals cracks quickly and efficiently.
• Ministry of Transport Québec acceptance.
• Ministry of Environment Ontario acceptance.
• Low Pressure Procedure (for low water flow) - SikaFix PU is supplied in a single or side-by-side cartridges and is easily ispensed with a manual gun through a 6 mm (1/4 in) mixing tube. Sika Injection Ports are used for this procedure.
• High Pressure Procedure (for high water flow) - SikaFix PU is supplied in a simple 1:1 ratio unit, it can be dispensed through a 1:1 injection pump or premixed and dispensed through a high pressure pump or grease gun

Colour

Amber

Packaging

22.5 L (5.9 US gal.) unit,
250 mL (8.5 fl. oz)
600 mL (20.2 fl. oz) Pre-Pack cartridge, 12/case

Use

SikaFix permanently stops unwanted water, which is penetrates into or through:

• Basement and foundation walls
• Cracked or honey combed concrete.
• Concrete joints.
• Masonry & rock.
• Pipe intrusions.
• Wastewater or septic tanks.

Characteristics and Advantages

• Economical.
• Easy to apply, no specialized equipment required.
• Permanently flexible.
• 0% shrinkage.
• Hydrophobic - only a small amount of water needed for reaction.
• Tenacious adhesion to wet and dry surfaces.
• Environmentally friendly (cured product is inert).

Colour

Light amber

Packaging

1 cartridge (250ml) SikaFix PU
1kg (2.2lbs) SikaPlug mortar
20 injection T’s & plastic plugs
Instruction Sheet & DVD