Use

• On horizontal surfaces subject to light foot traffic, such as balconies.
• To waterproof concrete drinking water tanks, reservoirs, and clearwells.
• For internal and external, horizontal and vertical water- and damp-proofing of concrete, mortar, blockwork and brickwork.
• For protection of concrete structures against the harmful effects of de-icing salts and freeze/thaw cycles.
• For sealing static hairline cracks in concrete structures not subject to movement.
• For interior and exterior waterproofing of basements.
• To protect rigid, extruded polystyrene foam.

Characteristics and Advantages

• Improves the watertightness of water-containing concrete tanks, reservoirs, and clearwells.
• Protects against water penetration, while being water vapour permeable (breathable).
• Excellent freeze/thaw resistance.
• Good adhesion to sound, prepared substrates.
• Mixing and application is fast and easy.
• Good abrasion resistance.
• Protects against concrete carbonation; 2 mH25m (80 mils) of SikaTop Seal 107^CA is equivalent to 150 mm (6 in) of concrete.
• Formulated with inert, non-reactive aggregates to eliminate potential Alkali-Aggregate Reactivity (AAR).
• Can be mixed to slurry or trowelable consistency.
• Improves concrete/masonry appearance.
• NSF/ANSI Standard 61 approved for potable water (special order only).

Colour

Concrete Grey

Packaging

18 kg (39.6 lb) kit
Yields 9 L (2.4 US gal.) of slurry

Use

For resurfacing 0.5 - 3 mm (20 - 120 mils) thick:

• On green or damp concrete, mortar and stone.
• As a thin-film sealer coat for vertical and horizontal surfaces.
• As a temporary moisture barrier prior to the application of polymer coatings
(minimum 2 mm (80 mils) thickness). Note: Sikagard 75 EpoCem^CA must be sealed with a suitable Sika epoxy coating to form a permanent vapour barrier. Contact Sika Canada Technical Sales for a recommendation.
• For repairing spalled and pitted concrete, blowholes and honeycombing.
• Ideal for the repair of damp or saturated substrates such as sewage treatment plants, water treatment plants, tanks, tunnels, drains, etc.
• On grade, above and below grade on concrete.

Characteristics and Advantages

• Economical structural repair and resurfacing compound.
• Fast and easy to apply.
• Sprayable.
• Solvent-free and virtually odourless.
• Can be overcoated with polymer based (epoxy) coatings after 24 hours.
• Eliminates effects of osmotic blistering.
• Self-priming.
• Waterproof.
• Permeable to water vapour (allows substrate to “breathe”).
• Compatible with coefficient of thermal expansion of concrete.
• Excellent adhesion to damp concrete.
• Equally suitable for interior and exterior use

Colour

Dark Grey, when mixed

Packaging

23 kg (51 lb) unit