Use

• Sealing of parking garage or parkade ramps and decks.
• Bridge decks and abutments.
Barrier walls.

Characteristics and Advantages

• Penetrates deep into the masonry or concrete substrate.
• Longlasting action.
• The deep penetration protects it from weathering, ultra violet radiation and abrasion.
• Significantly reduces chloride ion intrusion while allowing concrete and masonry to breathe. Corrosion of the structure can therefore be reduced.
• Moisture insensitive.
• Sikagard SN100 is approved by Alberta Transportation & Utilities for use on Traffic Bearing surfaces such as bridge decks and parking garage decks at 4.87 m²/L or 205 mL/m²/ (198 ft²/US gal. or 0.64 fl. oz ft²), Type 1c sealer.

Colour

Clear

Packaging

18.9 L (5 US gal.) unit
205 L (55 US gal.) drum

Use

• Sikagard SN40 Lo-VOC is effective in sealing building facades and civil engineering structures.
• It is suitable for use on exposed horizontal and vertical surfaces including bridge and parking decks, barriers, abutment walls and marine structures.
• It is used to prevent deterioration arising out of soluble salts and freeze/thaw damage in reinforced concrete and porous block or brickwork.
• Sikagard SN40 Lo-VOC will prolong the design or service life of buildings and civil engineering structures.

Characteristics and Advantages

• VOC compliant; satisfying environmental regulations.
• Easy and economical to apply.
• Moisture insensitive; can be applied in damp conditions and still perform.
• Penetration protects it from weathering, ultra violet radiation and abrasion.
• Reduces water absorption in splash zones and against driving rain.
• Reduces chloride ion intrusion through repelling of water.
• Can provide corrosion management for reinforced concrete.
• Allows vapour diffusion and treated surfaces to "breathe".
• Lasts for many years; providing a long-term, cost effective solution.
• Ministry Of Transport Québec Acceptance.
• Approved by Alberta Transportation as a Type 1a and 1b concrete sealer for use on traffic bearing surfaces, such as bridge and parking garage decks.

 

Colour

Clear

Packaging

18.9 L (5 US gal.) pail - Including 600 mL (20 fl. oz) Caustic Soda and 200 L (52.8 US gal.) drum

Use

• Sikagard 740W effectively seals building facades and civil engineering structures constructed from concrete or masonry.
• It is also suitable for use on horizontal surfaces including concrete bridge and parkade decks, ramps and highways.
• It is used to prevent degradation and failure of reinforced or porous substrates.
• Sikagard 740W is suitable for the treatment of new and existing structures to extend their service life.

Characteristics and Advantages

• VOC compliant, satisfying environmental regulations.
• Supplied ready for use; no dilution or mixing required.
• Easy and economical to apply.
• Highly penetrative, forming an integral barrier within treated surfaces.
• Excellent depth of penetration protects it from weathering, ultra violet radiation, erosion and abrasion.
• Reduces water absorption, protecting vertical and horizontal surfaces in splash zones and against driving rain.
• Resistant to sea water and de-icing salt solutions.
• Reduces intrusion of chloride ions and pollutants which are dissolved in water.
• Defined as corrosion management for reinforced concrete structures.
• Vapour permeable allowing substrates to "breathe".
• Can be overcoated with Sikagard coatings for additional protection.
• Approved by Alberta Transporation as Type 1b Penetrating sealer for outdoor traffic bearing surfaces, such as bridge decks.

 

Colour

Milky white liquid; clear when dry

Packaging

18.9 L (5 US gal.) pail
200 L (52.8 US gal.) drum