Use

• Multi-storey parking garages.
• Parking decks and ramps.
• Foot bridges and walkways.
• Mechanical rooms.
• Stadiums and arenas.
• Plaza and rooftop decks.
• Balconies and terraces.

Characteristics and Advantages

• Full-range system to accommodate varying conditions and demands.
• Generally single-part materials, eliminating mixing and increasing productivity.
• Excellent crack-bridging properties and flexibility, even at low temperatures.
• Outstanding resistance to abrasion, wear and ultra-violet light.
• Impervious to water and de-icing salts and resistant to incidental vehicle fluids.
• A range of standard colours and decorative options available.
• Passes requirements of ASTM C957, recognised by CSA Standard S413-07
  “Parking Structures”, Annex A.

Colour

Sikalastic® 710 Base: Grey
Sikalastic® 715 Top: Grey, Charcoal, Tan

Packaging

Sikafloor® FTP:          26.5 L (7 US gal.) kit (yields 26.5 L [7 US gal.]
                                after dilution with 9.5 L [2.5 US gal.] water)
Sikalastic® 710 Base: 18.9 L (5 US gal.) pails and 189 L (50 US gal.) drums
Sikalastic® 715 Top:  18.9 L (5 US gal.) pails and 189 L (50 US gal.) drums
Sikalastic® 700 ACL:  0.95 L (1 US qt) cans, 9/carton

Use

• Multi-storey parking garages.
• Foot bridges and walkways.
• Mechanical rooms.
• Stadiums and arenas.
• Plaza and rooftop decks.
• Balconies and terraces.

Characteristics and Advantages

• Full-range series to accommodate higher performance and aesthetic demands.
• Generally single-part materials, eliminating mixing and increasing productivity.
• Outstanding resistance to abrasion, wear and ultra-violet light.
• Impervious to water and deicing salts and incidental vehicle fluids.
• Superior colour and gloss retention and cleanability.
• A range of standard colours as well as custom and decorative options.

Colour

Sikalastic® 735 AL and 736 AL Lo-VOC Grey, Charcoal, Tan
Sikalastic® 748 PA Clear
Custom colours of all are available

Packaging

Sikalastic® 735 AL and 736 AL Lo-VOC Seau de 18,9 L (5 gal US)
Sikalastic® 748 PA Unité de 15,1 L (4 gal US)
Sikalastic® 700 ACL Pot de 0,95 L (1 pinte US), 9/carton

Use

■ Use as a concrete primer or moisture vapour treatment under Sikafloor® epoxy and urethane
coatings as well as broadcast and trowelled systems.
■ Also used as a primer and adhesion promoter for polyurethane-based Sikalastic® Traffic
Systems.

Characteristics and Advantages

■ Excellent adhesion to green concrete.
■ Primer applied to concrete within 8 hours of pour requires no mechanical preparation.
■ Superior penetration of green concrete substrates.
■ Low VOC.
■ Fast dry time.
■ Low odour.
■ Moisture tolerant.
■ Meets ASTM C309 requirement for use as a concrete curing compound.

Packaging

Sikafloor® FTP is packaged in pre-proportioned units which then provide a complete kit. The kit consists of 2 x 3.78 L (1 US gal.) cans of Part R (resin) and a 2 x 4.73 L (1.25 US gal.) pails of Part H (hardener).
Note: To the kit ( 2x Part R & 2x Part H) 18.9 L (5 US gal) of water is added. The kit will yield 35.9 L (9.5 US gal.) of primer.