Sikaflex®-2c SL
Two-Component, Self-Levelling, Polyurethane Elastomeric Sealant
- Capable of ± 50% joint movement.
- True self-levelling properties.
- Chemical cure allows the sealant to be placed in joints exceeding 13 mm (1/2 in) in depth.
- High elasticity with a tough, durable, flexible consistency.
- Exceptional cut and tear resistance.
- Exceptional adhesion to most substrates without priming.
- Available in 40 architectural colours.
- Colour uniformity assured via Color-pak system.
- Available in pre-pigmented Limestone Grey (no Color-pak needed).
- Self-levelling consistency, easy to apply in horizontal joints.
- Easy to mix.
- Paintable with water, oil, and rubber-base paints.
- Jet fuel resistant.
- USDA approved.
- Booster pak available for faster cure in cold weather.
- Meets ASTM C920, Type M, Grade P, Class 25, use T, NT, M, G, A, O, I.
- Meets Federal Specification TT-S-00227E, Type I, Class A.
- Meets Federal Specification TT-S-001543A
- Meets Federal Specification TT-S- 00230C
- Meets CAN/CGSB 19.24-M90.
- Canadian Food Inspection Agency acceptance.
- Ministère des Transports du Québec acceptance.
Usage
- Intended for use in all properly designed working joints with a minimum depth of 6 mm (1/4 in).
- Ideal for horizontal applications.
- Can be applied at temperatures as low as 4°C (39°F).
- Adheres to most substrates commonly found in construction.
- Submerged conditions, such as canal and reservoir joints.
- Ideal for vehicle traffic joints.
Advantages
- Capable of ± 50% joint movement.
- True self-levelling properties.
- Chemical cure allows the sealant to be placed in joints exceeding 13 mm (1/2 in) in depth.
- High elasticity with a tough, durable, flexible consistency.
- Exceptional cut and tear resistance.
- Exceptional adhesion to most substrates without priming.
- Available in 40 architectural colours.
- Colour uniformity assured via Color-pak system.
- Available in pre-pigmented Limestone Grey (no Color-pak needed).
- Self-levelling consistency, easy to apply in horizontal joints.
- Easy to mix.
- Paintable with water, oil, and rubber-base paints.
- Jet fuel resistant.
- USDA approved.
- Booster pak available for faster cure in cold weather.
- Meets ASTM C920, Type M, Grade P, Class 25, use T, NT, M, G, A, O, I.
- Meets Federal Specification TT-S-00227E, Type I, Class A.
- Meets Federal Specification TT-S-001543A
- Meets Federal Specification TT-S- 00230C
- Meets CAN/CGSB 19.24-M90.
- Canadian Food Inspection Agency acceptance.
- Ministère des Transports du Québec acceptance.
Packaging
5.7 L (1.5 US gal.) unit11.4 L (3 US gal.) unit
Color-pak and Sikaflex 2c Booster sold separately
