Product Data Sheet Safety Data Sheet Show all documents

KEIM Design Lasur

Ready-to-use pigmented mineral stain (Lasur) concentrate, sol-silicate based according to DIN EN 1062-1, which is used in combination with KEIM Design-Base and KEIM Design-Dilution (Fixativ) to create translucent and opaque wall designs with an intensive mineral character. KEIM Design-Lasur also complies with DIN 18 363, 2.4.1, silicate emulsion paint and DIN EN 1504-2/2.2. Brilliant and absolutely lightfast due to inorganic colour pigments. Resistant to weathering and environmental influences.

Surfaces designed with the KEIM Design-Lasur-System are:

  • Light-fast, will not fade
  • Weather resistant
  • Resistant to environmental influences
  • Mineral matt finish that lasts
  • LEED certified 
Product Data Sheet Safety Data Sheet Show all documents

Usage

KEIM Design-Lasur for creative designs both interior and exterior on vertical surfaces and ceilings. For wider range of design options use over KEIM silicate paints. KEIM Design-Lasur can be used as a full finish over an entire building or a decorative design/mural on a single wall. With two or three coats of KEIM Design-Lasur mixed in the desired ratio with KEIM Design-Base or KEIM Design-Dilution (Fixativ) - the most various translucency effects can be achieved.

Transparency and colour depth depend on the chosen colour shade and the dilution ratio. Dilution ratios from 1:1 up to 1:20 (Design-Lasur to Design- Dilution) are common. Create all levels of colour from completely opaque to a hint of colour on the\ façade. By using KEIM Design-Base the Design Lasur has a better application consistency, reduced settling and a longer open time.

Advantages

Surfaces designed with the KEIM Design-Lasur-System are:

  • Light-fast, will not fade
  • Weather resistant
  • Resistant to environmental influences
  • Mineral matt finish that lasts
  • LEED certified 

Packaging

1 gallon, 2 gallon and 4 gallon sizes (packaged in a 5 gallon pail).

Documents