King® MasonMix 600
MasonMix 600 is a pre-blended, pre-packaged mortar, specifically designed for use in applications of non-load-bearing walls. MasonMix 600 is a blend of 1 part Portland cement, 2 parts Type S hydrated lime, 6 parts masonry sand, and other carefully selected components. MasonMix 600 conforms to ASTM C 270 for Type O Mortar, by volume, with the addition of water. It is available in grey, cream and white, but can also be blended with a variety of colouring agents.
- High vapour transmission properties
- Superior workability
- Autogeneous healing properties
- Low strength
- Pre-blended, ensuring consistency from the first batch to the last
- All KING products are manufactured using ISO 9001:2015 Certified Processes
Usage
- Ideal for use in non-load-bearing wall applications
- Can be applied indoors, outdoors or for any other masonry application where low strength and superior workability is required
- Do not use the MasonMix 600 when mortar Type N or S is specified. In this case, it is recommended to use the KING 1-1-6 or KING 2-1-9
- The substrate and mortar temperature should be between 5 °C (40 °F) and 38 °C (100 °F) and maintained in this range for 72 hours after mortar application
- Never use on-site admixtures to modify setting time, workability, or any other properties of plastic or hardened mortar
- Use only the recommended water content to achieve the desired plastic and hardened mortar properties
Advantages
- High vapour transmission properties
- Superior workability
- Autogeneous healing properties
- Low strength
- Pre-blended, ensuring consistency from the first batch to the last
- All KING products are manufactured using ISO 9001:2015 Certified Processes
Packaging
MasonMix 600 is normally packaged in 30 kg (66 lb.) triple-lined bags and poly wrapped on wooden pallets. All KING products can be custom packaged to suit specific job requirements.
