Show all documents

Reconstec MF

Reconstec MF is a blended mortar, specially developed for use over masonry joints that require maximum flexibility. This mortar is a two component polyurethane based elastomeric sealant. It is available in grey, but can also be blended with a variety of colouring agents. The surface finish of Reconstec MF is polished.

  • High bond strength
  • Maximum flexibility
  • Superior workability
  • Excellent resistance to de-icing salts
Show all documents

Usage

  • For joints with a minimum depth of 6 mm (1/4)
  • Developed for use in areas where small movements occur and where regular mortar is subject to cracking
  • Ideal for church squares
  • Can be used in control joints
  • Achieves high bond strength with indoor or outdoor applications

Advantages

  • High bond strength
  • Maximum flexibility
  • Superior workability
  • Excellent resistance to de-icing salts

Packaging

2 plastic pails (part A and B). 

Colour

grey, but can be coloured 

Documents

Related Pages

Parapet

Elements that compose an outdoor parapet are subject to a high level of saturation since the front, back and top are exposed to the elements.

Mortar for Isolation Joints

Isolation joints are commonly used in modern building construction in order to prevent masonry facings from cracking. Isolation joints allow walls to expand or contract in multiple directions.

Flagstones and Pavers

Selecting the mortar that will fix the flagstones or pavers to the ground and the mortar that will be installed around the perimeter of units, is particularly important since the flagstones and pavers may be exposed to de-icing salts.

Chimneys and Parapet

Chimneys and parapets have the particularity of being strongly exposed to the elements, such as rain, wind, as well as being exposed to a large number of drying-wetting cycles during the cold periods and this without much protection.

Repointing Stairs

Stairs are generally made from granite stone. Granite is a very dense material which makes it difficult to absorb water contained in fresh mortar. Because of this, the bond between mortar and masonry could be affected.