Product Data Sheet Safety Data Sheet Show all documents

Sikafloor®-31 NA PurCem® FS

ADVANCED GENERATION, FAST SET, HIGH-BUILD AND SOLVENT-FREE POLYURETHANE/
CEMENT PRIMER, COATING AND TOP COAT

  • Applicable onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi)
  • ƒEconomical and easy installation requiring less labour to install than traditional Sikafloor® PurCem® materials
  • ƒVersatile material suitable for application as a primer, standalone coating and top coat for other PurCem systems
  • ƒFaster set times make it ideal for quick turn around projects
  • ƒResists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Canada for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart
  • ƒSimilar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling
  • ƒPerforms and retains its physical characteristics through a wide temperature range from -10 °C (14 °F) up to 90 °C (194 °F)
  • ƒSuperior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications
  • Bond strength in excess of the tensile strength of concrete, concrete will fail first
  • ƒNon-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards
  • Behaves plastically under impact; deforms but will not crack or debond
  • ƒExcellent long term wear resistance from a two-coat application
  • ƒEasily maintained using commonly employed methods and phenol-free detergents
  • ƒAchieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth (special order grade)
  • ƒMeets incidental food contact requirements of CFIA and USDA for use in food plants
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Sikafloor®-31 NA PurCem® FS is primarily used as a chemically resistant high build coating used to protect horizontal and vertical concrete substrates, but is equally effective over Sikafloor®-19 NA PurCem® FS, Sikafloor®-20 NA PurCem® FS, Sikafloor®-22 NA PurCem® FS, Sikafloor®-24 NA PurCem® FS and Sikafloor®-29 NA PurCem® FS
  • Typically used in food processing plants, chemical storage areas, warehouses, washrooms, laboratories, food preparation areas and chemical process plants

Advantages

  • Applicable onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi)
  • ƒEconomical and easy installation requiring less labour to install than traditional Sikafloor® PurCem® materials
  • ƒVersatile material suitable for application as a primer, standalone coating and top coat for other PurCem systems
  • ƒFaster set times make it ideal for quick turn around projects
  • ƒResists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Canada for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart
  • ƒSimilar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling
  • ƒPerforms and retains its physical characteristics through a wide temperature range from -10 °C (14 °F) up to 90 °C (194 °F)
  • ƒSuperior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications
  • Bond strength in excess of the tensile strength of concrete, concrete will fail first
  • ƒNon-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards
  • Behaves plastically under impact; deforms but will not crack or debond
  • ƒExcellent long term wear resistance from a two-coat application
  • ƒEasily maintained using commonly employed methods and phenol-free detergents
  • ƒAchieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth (special order grade)
  • ƒMeets incidental food contact requirements of CFIA and USDA for use in food plants

Packaging

5.56 kg (3.86 L) unit / 12.25 lb (1.02 US gal.) unit.

Colour

RAL 3009 Oxide Red, RAL 7038 Agate Grey, Sika® Medium Grey (Formely Telegrey 2) RAL 1001 Beige, RAL 5005 Signal blue. Special colours (on request). Refer to current price list for availability.

Documents