Sikafloor®-24 NA PurCem® FS

ADVANCED GENERATION, FAST SET, MEDIUM-DUTY AND SELF-LEVELLING, THIN LAYER
POLYURETHANE/CEMENT SCREED FOR GENERAL INDUSTRIAL AND COMMERCIAL USE

  • Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi)
  • ƒEasy installation requiring less labour to install than traditional Sikafloor® PurCem® trowel grade materials
  • ƒFaster set times make it ideal for quick turn around projects
  • ƒWide range of application temperatures from 7 °C (45 °F) minimum to 38 °C (100 °F) maximum
  • Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Canada for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart
  • Good abrasion resistance, providing cost effective and durable floor topping
  • ƒSimilar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling
  • ƒPerforms and retains its physical characteristics through a wide, wet or dry temperature range from -5 °C (41 °F) at 2 mm and -10 °C (14 °F) at 4 mm up to 120 °C (248 °F)
  • Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications
  • ƒBond strength in excess of the tensile strength of concrete, concrete will fail first
  • ƒNon-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards
  • Behaves plastically under impact; deforms but will not crack or debond
  • ƒExtra expansion joints are not necessary; simply maintain and extend existing expansion joints up through the Sikafloor® PurCem® FS Flooring System
  • ƒCompatible with a wide range of Sikafloor epoxy or polyurethane resin sealers, enabling UV stable sealer to be applied where required. Consult Sika Canada for full details
  • ƒEasily maintained using commonly employed methods and phenol-free detergents
  • ƒAchieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
  • ƒMeets the requirements of CFIA and USDA for use in food plants