Product Data Sheet Safety Data Sheet Show all documents

Sikafloor®-29 NA PurCem® FS

ADVANCED GENERATION, FAST SET, HIGH STRENGTH POLYURETHANE/CEMENT COVING
AND DETAILING MORTAR

  • Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi)
  • Designed specifically for trowel application to vertical surfaces and at wall/floor junctions
  • ƒFaster set times make it ideal for quick turn around projects
  • ƒEasy installation requiring less labour to install than traditional Sikafloor® PurCem® trowel grade materials
  • ƒResists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Canada for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart
  • ƒSimilar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling
  • Performs and retains its physical characteristics through a wide temperature range from -40 °C (-40 °F) up to 120 °C (248 °F)
  • Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications
  • ƒBond strength in excess of the tensile strength of concrete, concrete will fail first
  • ƒNon-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards
  • Behaves plastically under impact; deforms but will not crack or debond
  • High abrasion qualities result from its pure silica aggregate structure
  • ƒEasily maintained using commonly employed methods and phenol-free detergents
  • ƒAchieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth
  • ƒMeets the requirements of CFIA and USDA for use in food plants
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Sikafloor®-29 NA PurCem® FS is primarily used to protect vertical concrete substrates, but is equally effective over most steel surfaces that have been properly prepared and supported
  • ƒTypically used in food processing plants, wet and dry process areas, freezers and coolers, dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, warehouses and storage areas

Advantages

  • Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi)
  • Designed specifically for trowel application to vertical surfaces and at wall/floor junctions
  • ƒFaster set times make it ideal for quick turn around projects
  • ƒEasy installation requiring less labour to install than traditional Sikafloor® PurCem® trowel grade materials
  • ƒResists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Canada for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart
  • ƒSimilar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling
  • Performs and retains its physical characteristics through a wide temperature range from -40 °C (-40 °F) up to 120 °C (248 °F)
  • Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications
  • ƒBond strength in excess of the tensile strength of concrete, concrete will fail first
  • ƒNon-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards
  • Behaves plastically under impact; deforms but will not crack or debond
  • High abrasion qualities result from its pure silica aggregate structure
  • ƒEasily maintained using commonly employed methods and phenol-free detergents
  • ƒAchieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth
  • ƒMeets the requirements of CFIA and USDA for use in food plants

Packaging

202.96 kg (95.28 L) unit / 447.45 lb (25.17 US gal) Unit

Colour

RAL 3009 Oxide Red, RAL 7038 Agate Grey, Sika® Medium Grey (Formely Telegrey 2) RAL 1001 Beige, RAL 5005 Signal blue. Special colours (on request). Refer to current price list for availability.

Documents