Sikafloor®-33 N PurCem®

Sikafloor®-33 NA PurCem® is state-of-the-art, fine textured, high-build coating with a matte finish, based upon pthalatefree, water- dispersed polyurethane/cement and aggregate technology. It is designed as a standalone coating for concrete and as a top coat for Sikafloor® NA PurCem® systems. It is new technology that significantly improves colour fastness, virtually eliminating the yellowing commonly associated with light coloured, conventional PUC products. It also provides a higher performing sealed surface with excellent chemical-, very good abrasion, and enhanced mechanical resistance. Sikafloor®-33 NA PurCem® represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.

  • ƒƒCan be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi).
  • Economical and easy installation requiring less labour to install than traditional Sikafloor® PurCem® materials.
  • Versatile material suitable for application as a standalone coating and top coat for other PurCem systems.
  • Longer pot life permits increased productivity with less waste.
  • Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Technical Sales for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart.
  • Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling.
  • Performs and retains its physical characteristics through a wide temperature range from -10 °C (14 °F) up to 90 °C (194 °F).
  • Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications.
  • Bond strength in excess of the tensile strength of concrete, concrete will fail first.
  • Non-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards.
  • Behaves plastically under impact; deforms but will not crack or debond.
  • Excellent long term wear resistance from a two coat application.
  • Easily maintained using commonly employed methods and phenol free detergents.
  • Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth (special order grade)
  • Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Paints and Coatings.
  • Meet the requirements of CFIA and USDA for use in food plants.