ONE-COMPONENT: Balcony and Parking Coating Systems

Fully bonded and seamless elastomeric waterproofing polyurethane system. Easily applied, repaired and renewed, for exterior and interior top coats on structural slabs to provide improved wear and UV resistance.

FEATURES BENEFITS
Single component system Ease of application with unlimited pot life restrictions
Seamless and fully bonded Eliminates lateral water migration undermining durability
Elastomeric across temperature range Excellent crack bridging properties even at low temperatures
Abrasion and chemical resistant Resist to light vehicle traffic, vehicle fluids spills and as well to deicing salts exposure
Different variations of surface textures may be achieved* Increased mechanical properties and slip resistance
Liquid applied membrane, easily maintained Low cost to install and maintain
Acceptable for exterior applications Enhanced wear and UV resistance, with broader choice of colours

* Surface texture will be determined by quantity and gradation of sand broadcasted into wear course

parking with balconies

Wear Course Colours* Custom colours available on request

wear course colours
system components
balcony deck

SYSTEM BUILD-UP

Light Duty Zones
light duty zones
Heavy Duty Zones
heavy duty zones

TWO-COMPONENT: Sikalastic®-3900 Traffic System

This system utilizes polyurethane and epoxy technologies to protect steel-reinforced, concrete traffic and pedestrian decks from the damaging effects of chlorides and water ingress. Manufactured in Canada, specifically for Canadian conditions.

FEATURES BENEFITS
Conforms to standard CSA S413-14 Conforms to most recent Canadian standards for parking garages
Low temperature crack bridging Continued protection across ~1.5 mm (1/16 in) wide crack at -26 °C (15 °F)
Medium to low viscosity systems Easy to install / increased productivity
Resistance to chemicals and solutions Barrier to deicing salts and automotive fluids
Different variations of surface textures may be achieved* Increased mechanical properties and slip resistance
Seamless waterproofing and protection Prolonged service life of structures
Two-component, hybrid wearing courses Excellent abrasion and wear resistance

* Surface texture will be determined by quantity and gradation of sand broadcasted into wear course

Wear Course Colours* Custom colours available on request

wear course colours
system components

*Use Sikalastic®-394 as final wear course for UV resistance to sunlight exposure.

• Additional wear course options, such as Sikalastic®-220 FS and Sikalastic®-8200, are also available. Contact your Sika Canada technical representative for features, advantages and recommendations.

• Zone descriptions and thicknesses above are recommended for guideline purposes. If thickness variations are required outside of these parameters, contact Sika Canada.

• Surface profile and/or porosity will influence consumption required to achieve the minimum film thicknesses recommended.

• For surface textures (broadcast aggregates) and all other technical, application information and product limitations, refer to the Product Data Sheet of the related product.

• For slabs on grade, use Sika Ferrogard®-908, Sikagard® SN-40 Lo-VOC or Sikagard® SN-100 protective penetrating silane sealers.

parking application
parking application

SYSTEM BUILD-UP

Light Duty Zones
light duty zones
Heavy Duty Zones
heavy duty zones