Concrete Repair and Maintenance Products

Sika’s ready-to-use bagged concrete, mortars, screeds, cementitious grouts, along with aggregate- and cement-based surface hardeners (as supplied to the customer) intended for concrete repair and maintenance of concrete and for which the initial VOC content has been established at 0 g/L1 may be considered as ’’Inherently non emitting sources’’ like concrete, and are not subjected to chamber testing for VOC emissions2.

To learn more about the LEED v4 initiatives, please consult our information page.

 

1 As per SCAQMD Rule 1113 (and other accepted methods), tested in Sika Canada’s Pointe-Claire (QC) laboratories operating under the ISO 14001 and ISO 9001 certifications.

2 Refer to LEED reference guide for building design and construction, p 676 – Emissions and Content Requirement: Inherently non-emitting sources.

Sikacrete®-08 SCC

Sikacrete®-08 SCC is a ready-to-use, highly flowable, self-compacting, cement-based concrete, usable for concrete thickness between 25 and 450 mm (1 and 18 in).

Sikacrete®-211 Flow Plus

Sikacrete®-211 Flow PLUS is a pre-packaged, ready-to-use, flowable, cement-based concrete, usable for concrete thicknesses exceeding 25 mm (1 in). Sikacrete®-211 Flow PLUS contains special additives designed to improve the ease of use and facilitate surface finishing.

SikaQuick®-1000

Rapid-Hardening Repair Mortar with Extended Working Time

Sikagrout®-212

High Quality, Well Proven, Versatile and Non-Shrink, Cementitious Grout

SikaGrout®-212 HP

High-Performance, Non-Shrink, Cementitious Grout

SikaGrout®-300 PT

High-Performance, Zero-Bleed, Sand-Free, Cementitious Grout

Sika MonoTop®-622

One-Component, Polymer-Modified, Horizontal and Vertical Repair and Resurfacing Mortar with Integral Corrosion Inhibitor

Sika MonoTop®-622 F

Sika MonoTop®-622 F is a one-component, microfibre-reinforced, polymer-modified and early strength-gaining, cementitious mortar for horizontal and vertical concrete repair and resurfacing. It is based upon Sika proven and established MonoTop® technology, designed for effective repairs, with the environment in mind. MonoTop®-622F

Sika MonoTop®-623

One-Component, Polymer-Modified Overhead and Vertical Repair and Reprofiling Mortar with Integral Corrosion Inhibitor

Sika MonoTop®-623 F

Sika MonoTop®-623 F is a one-component, polymer-modified, fibre-reinforced and early strength-gaining, cementitious mortar for overhead and vertical concrete repair and reprofiling. It is based upon Sika’s internationally proven and established MonoTop® technology, designed for effective repairs and with the environment in mind. MonoTop®-623F

SikaTop®-121 Plus

Polymer-Modified, Thin-Coat Mortar/Binder, PLUS Migrating Corrosion Inhibitor

SikaTop®-122 Plus

Polymer-Modified, Cementitious, Trowel-Grade Mortar, PLUS Migrating Corrosion Inhibitor

SikaTop®-123 Plus

Polymer-Modified, Cementitious, Non-Sag Mortar, PLUS Migrating Corrosion Inhibitor

SikaTop® Armatec®-110 EpoCem®

Anti-Corrosion Coating and Bonding Agent

Sika® Level-01 Primer

Sika® Level-01 PrimerCA is a one-component, water-dispersed, solvent-free, acrylic-based solution used to prime and seal floor surfaces prior to the application of Sika® Level-125CA underlayments and Sikafloor® Level-25CA and Sikafloor® Level-50CA overlayments.

Sikafloor® Level-25

Cementitious Self-Levelling Floor Screed.

Sikafloor® Level-50

Deep Section, Cementitious, Self-Levelling, Sub-Floor Screed.

Sika® Level-125 N

Polymer-Modified and Sika® ViscoCrete® Improved, Self-Levelling Cementitious Underlayment for Use at 1 to 38 mm (1/25 to 1 1/2 in) Thickness

Sikafloor®-52 PC

Sikafloor®-52 PC Grey is a one-component, high strength, fast-setting, self-levelling, self-drying, grey cementitious floor topping specifically formulated to accept stains, dyes and polishing. Rapid early strength gain allows foot traffic in 3 - 4 hours and polishing after 24 hours. Typical application thickness 10 to 25 mm (3/8 to 1 in).

Sikafloor®-53 PC

Sikafloor®-53 PC White is a one-component, high strength, fast-setting, self-levelling, self-drying, white cementitious floor topping specifically formulated to accept stains, dyes and polishing. Rapid early strength gain allows foot traffic in 3 - 4 hours and polishing after 24 hours. Typical application thickness 10 to 25 mm (3/8 to 1 in).