Floor/Wall Coatings

Below is a list of Sika products for which Environmental Product Declarations (EPD) are currently developed. Please note that the list may be subject to change, consult Sika Canada for additional information.

To learn more about the LEED v4 initiatives, please consult our information page.

Sika® Duroplast 100

High Gloss, High Solids, Low Odour, Abrasion Resistant, Epoxy Floor and Wall Coating

Sika® Duroplast 150

UV Resistant, High Solids, Low Odour, Water Based Epoxy Wall Coating three Gloss Levels: Matte, Satin and Gloss

Sikagard® Duroplast EE

Sikagard® Duroplast® EE is a two-part, high performance blockfiller designed to prime and fill small pours and reduce surface irregularities on properly prepared walls and ceilings. It serves to fill voids on porous surfaces and improve both the adhesion and appearance of high quality Sikagard® Duroplast® finishes that will be exposed to high levels of moisture in service.


Sikafloor®-156CA is a two-component, solvent-free, low-viscosity, high-strength, epoxy resin, used as an epoxy primer and binder for Sikafloor® Systems.


Sikafloor® 1610 is a two component, high solids yet low modulus and low viscosity, epoxy primer. This resin is highly penetrative, seals substrates, contains a red trace dye to allow coverage to be ensured and is of low-VOC content. Sikafloor® 1610 NA has been especially formulated to operate as a moisture tolerant adhesion promoter beneath Sikafloor® , Sikaguard® and Sikalastic® epoxy and urethane coatings, broadcast or trowelled systems.


Sikafloor®-217 is a 100 % solids, low VOC, low odour, water clear, high gloss epoxy resin used to create premium quality high build coatings, broadcast or trowel-applied surfacing systems such as Sikafloor® Quartzite®, DecoFlake® and Metallic FX®. Sikafloor®-217 formulation contains state of the art raw materials and additives blended to create an aesthetic, clear epoxy that has the highest possible resistance to ultra violet light colour change over time.


Highly Versatile, Epoxy Resin Binder for Floor Finish Systems.


Sikafloor® 2002 is a two component, high solids, low odour, low VOC, high strength, high gloss, water clear epoxy resin formulated to have improved resistance to clarity change over time. This high performance resin has excellent aesthetic properties making it suitable as a clear binder and top coat for multicolored, decorative aggregate and flake systems; Sikafloor® Quartzite® and Sikafloor® DecoFlake®.

Sika® Duroplast 305 (Terrazzo Sealer)

Sikafloor® Duochem-9200

Clear Epoxy Binder Resin for Trowelled Quartz System