Specialty Flooring

Below is a list of Sika products for which Environmental  Product Declarations (EPD) are currently developed. Please note that the list may be subject to change, consult Sika Canada for additional information.

To learn more about the LEED v4 initiatives, please consult our information page.

Sikafloor®-200 ESD

Sikafloor® -222W ESD is a two-component, water-based epoxy conductive primer with high electrostatic conductivity. It is designed specifically for use in combination with Sikafloor® -260 ESD and Sikafloor® -270 ESD electrostatic conductive coating systems. Sikafloor® -222W ESD will impart static dissipative resistance readings when applied over new or existing concrete substrates or existing epoxy floors that have been primed with an adhesion and isolation layer of Sikafloor® -156CA , Sikafloor® -1610 or Sikafloor® -261CA .

Sikafloor®-260 ESD

Sikafloor®-260 ESD is a two-component, general service, low VOC, solid colour epoxy coating system designed to impart electrostatic control properties to a variety of substrates in conjunction with ESD footwear. Sikafloor®-260 ESD will impart static dissipative resistance readings when applied over new or existing concrete substrates or existing epoxy floors that have been primed with an adhesion and isolation layer of Sikafloor®-156CA, Sikafloor®-1610 or Sikafloor®-261CA.

Sikafloor®-270 ESD

Sikafloor®-270 ESD is a two-component, novolac epoxy coating system designed to impart high chemical resistance and electrostatic control properties to a variety of substrates in conjunction with ESD footwear. Sikafloor®-270 ESD will impart static dissipative resistance readings when applied over new or existing concrete substrates or existing epoxy floors that have been primed with an adhesion and isolation layer of Sikafloor®-156CA, Sikafloor®-1610 or Sikafloor®-261CA.

Sikafloor®-304 W

Sikafloor® 304 W is a two-component, water-based and low VOC containing polyurethane resin. It is used as matte finish, clear seal and top coat for Sika ComfortFloor® Decorative and ComfortFloor® Decorative Pro floor systems

Sikafloor®-305 W

Sikafloor® 305 W is a two-component, water-based and low VOC containing polyurethane resin. It is used as matte finish, coloured seal and top coat for flexible membrane systems, including Sika ComfortFloor® and ComfortFloor® Pro systems

Sikafloor®-22 N PurCem®

Medium Duty Self-Levelling Polyurethane Screed

Sikafloor®-31 N PurCem®

Solvent-Free High-Build, Polyurethane Coating

Sikafloor®-33 N PurCem®

Sikafloor®-33 NA PurCem® is state-of-the-art, high-build coating with a matte finish, based upon pthalate-free, water dispersed polyurethane/cement and aggregate technology applied at 10 mils per coat. It is designed as a standalone coating for concrete and as a top coat for Sikafloor® NA PurCem® systems. It is new technology that significantly improves colour fastness, virtually eliminating the yellowing commonly associated with light coloured, conventional PUC products. It also provides a higher performing sealed surface with excellent chemical-, very good abrasion, and enhanced
mechanical-resistance. Sikafloor®-33 NA PurCem® represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.

Sikafloor® Fastflor CR

Sikafloor® Fastflor® CR is a two-component, solvent-free and low-VOC containing, epoxy binder and coating available in unlimited colours. Sikafloor® Fastflor® CR provides extremely high chemical and mechanical resistance within a smooth or broadcast floor finish.