Polyurethane-based sealants

Use

• Designed for all types of joints with maximum depth of 13 mm (1/2 in) and a maximum expansion of 35 %.
• Excellent for small joints and fillets: windows, door frames, reglets, flashing, glazing, and many construction applications.
• Suitable for vertical and horizontal joints.
• Many applications as an elastic adhesive between materials with dissimilar thermal coefficients of expansion.
• Submerged conditions such as canal and reservoir joints.
• Ideal for: Weatherproofing of joints between brickwork, blockwork, masonry, wood and concrete or metal frames; joints in walls, floors, balconies, around window or door frames: expansion joints; roofing applications.

Characteristics and Advantages

• Capable of ± 35 % joint movement.
• Eliminates time, effort, and equipment for mixing, filling cartridges and cleaning of equipment.
• High elasticity - Cures to a tough, durable, flexible consistency with exceptional cut and tear resistance.
• Excellent adhesion - Bonds to most construction materials without primer in most cases.
• Excellent resistance to aging, weathering.
• Readily placeable at 4 °C (39 °F)
• Resists to fuel, mineral oils, and dilute minerals, plant and animal fats.
• Odorless, non-staining, can be painted over with water, oil, and rubber-based paints. Since some paints dry slowly and the surface may remain slightly tacky, a preliminary test is essential.
• Meets CAN/CGSB 19.13-M87, Classification MCG-2-25-B-N.
• Meets Federal Specification TT-S-00230C, Type II, Class A.
• Meets Federal Specification Spec TT-S-00227E
• Meets ASTM C920 Type S, Grade NS, Class 35. Use T, NT, O, M, G, I.
• Jet fuel resistant.
• ANSI/NSF Standard 61 approved for contact with potable water (Black, White, Colonial White, Aluminum Grey, Capital Tan, Limestone, Dark Bronze colours only).
• Urethane-based, suggested by EPA for radon reduction.
• USDA approved (chemically acceptable for use in meat and poultry processing areas under federal inspection).
• Meets the requirements of CFIA for use in food plants
• Ministère des Transports du Québec acceptance.
• Product qualified by The Road Authority (TRA).
• SWRI validated.
• Product recognized by the British Columbia Ministry of Transportation(BC MoT).

Colour

Aluminum Grey, Anodized Grey, Dark Bronze, Limestone, White, Colonial White, Capitol Tan, Black, Stone, Medium Bronze, Redwood Tan.

Packaging

300 mL (10.1 US fl. oz) cartridge, 24/case;
590 mL (20 US fl. oz) sausage, 20/case;

Use

Sikaflex®-1c SL is used to seal horizontal movement joints in concrete and cementitious substrates such as:

• Driveways and garage floors.
• Sidewalks and pavements.
• Balcony decks.
• Civil structures.
• Terrace decks.
• Pedestrian plazas
• Warehouse and factory floors.

Characteristics and Advantages

• ƒƒCapable of ± 25 % joint movement.
• Convenient, easy-to-use packaging.
• 1-component, no mixing required.
• Self-leveling, pourable consistency.
• Accelerated curing.
• Can be applied to green concrete 24 hours after pour.
• Can be applied to damp concrete 1 hour after getting wet.
• Resists aging and weathering.
• Jet fuel resistant.
• Meets Federal Specification TT-S-00230C, Type 1, Class A.
• Meets ASTM C920, Type S, Grade P, Class 25.
• Ministry of Transport Quebec Acceptance.

Colour

Concrete Grey

Packaging

300 mL (10.1 fl. oz) cartridge - 12/case
858 mL (29 fl. oz) cartridge - 12/case

Use

• Intended for use in all properly designed working joints with a minimum depth of 6 mm (1/4 in).
• Ideal for vertical and horizontal applications.
• Can be applied at temperatures as low as 4°C (39°F).
• Adheres to most substrates commonly found in construction.
• An effective sealant for use in Exterior Insulation Finish Systems (EIFS).
• Submerged environments, such as canal and reservoir joints.

Characteristics and Advantages

• Capable of ± 50 % joint movement.
• Chemical cure allows the sealant to be placed in joints exceeding 13 mm (1/2 in) in depth for non-moving joint.
• High elasticity with a tough, durable, flexible consistency.
• Exceptional cut and tear resistance.
• Exceptional adhesion to most substrates without priming.
• Available in 35 standard architectural colours.
• Colour uniformity assured via Color-pak system.
• Non-sag even in wide joints.
• Easy to mix.
• Paintable with water, oil, and rubber-base paints.
• Sikaflex 2c Booster available for faster cure in cold weather.
• ANSI/NSF Standard 61 approved for potable water contact (special order Pre-tinted Limestone only).
• Meets ASTM C920, Type M, Grade NS, Class 25, use T, NT, M, G, A, O
• Meets Federal Specification TT-S-00227E, Type II, Class A
• Meets Federal Specification TT-S-001543A
• Meets Federal Specification TT-S-00230C
• Meets CAN/CGSB 19.24 - M90
• USDA approved.
• Canadian Food Inspection Agency acceptance.
• Ministry of Transport Québec acceptance.
• UL certified to CAN/ULC-S115-05: Standard Method of Firestop Systems and to ANSI/UL 2070: Fire Resistance of Building Joint Systems (FF-S-1034, FW-S-1020, HW-S-1018, WW-S-1037) for use in Canada.
• Traffic grade available, see Sikaflex 2c NS EZ Mix TG Product Data Sheet for specifications.

Colour

35 standard architectural colours are available. Special colours available on request.

Packaging

5.7 L (1.5 US gal.) unit
11.4 L (3 US gal.) unit
Color-pak and Sikaflex 2c Booster sold separately.

Use

• Excellent for moving joints i.e. expansion, construction, whether in vertical or horizontal applications.
• Suitable for use between similar as well as dissimilar materials.
• Typical applications include joints in panel and wall systems, around window and door frames, reglets, flashings, etc.
• Exceptional sealant choice for high rise and facade applications where high movement capacity is required.
• An effective sealant for use in Exterior Insulation Finish Systems (EIFS).

Characteristics and Advantages

• Capable of +100% / -50% joint movement.
• Easy and ready to gun.
• Eliminates time, effort, waste, and equipment cleaning.
• Cures to a durable, flexible consistency.
• Excellent cut and tear resistance.
• Stress relaxation properties.
• Non leaching.
• UL certified to CAN/ULC-S115-05: Standard Method of Firestop Systems and to ANSI/UL 2070:
  Fire Resistance of Building Joint Systems (FF-S-0037, FW-S-0018, HW-S-0095, WW-S-0060) for
  use in Canada. Specific joint designs and substrates apply in Canada (see Limitations).
• Low modulus of elasticity.
• Excellent adhesion.
• Bonds to most construction materials, often without primer.
• Excellent resistance to aging, weathering.
• Proven in tough climates around the world.
• Can be painted with water-, oil- and rubber-based paints.
• Meets CAN/CGSB 19.13-M87, Classification MCG-2-40-B-N.
• Meets Federal Specification TT-S-00230C, Type II, Class A.
• Meets Federal Specification TT-S-00227E.
• USDA acceptance.
• Meets ASTM C719 Ext.+100% Comp.-50%.
• Meets ASTM C1382 when used in Exterior Insulation Finish Systems (EIFS) Joints.
• Meets Federal Specification for Silicones TT-S-001543A, Type NON SAG.
• SWRI validated.
• Canadian Food Inspection Agency acceptance.
• Ministère des Transports du Québec acceptance.

Colour

White, Colonial White, Aluminum Grey, Architectural Bronze, Limestone,
Black, Dark Bronze, Capitol Tan, Off White, Almond, Beige, Coping Stone,
Aluminum Stone, Redwood Tan, Hartford Green.

Packaging

300 mL (10.1 fl. oz) cartridge - 24/case
590 mL (20 fl. oz) sausage - 20/case
11.4 L (3 US gal.) pail (special order only).

Use

• Designed for joints where maximum depth of sealant will not exceed 13 mm (1/2 in).
• Suitable for vertical and horizontal joints.
• Has many applications as an elastic sealant between materials with dissimilar coefficients of expansion.
• Weatherproofing of joints between brickwork, blockwork, masonry, wood and concrete or metal frames.
• Joints in walls, floors, balconies, around window or door frames.
• Expansion joints.
• Roofing details.

Characteristics and Advantages

• High elasticity - cures to a tough, durable, flexible consistency with exceptional cut and tear resistance.
• Stress relaxation - prevents separation from joint walls.
• Excellent adhesion - bonds to most construction materials without a primer.
• Excellent resistance to aging, weathering.
• Non-staining - compatible with architectural substrates including marble and stone
• Urethane-based; suggested by EPA for radon reduction.
• Can be painted over with water, oil and rubber-based paints.
• Capable of ± 25% joint movement.
• ANSI/NSF Standard 61 potable water contact-approved formula available by special order only.
• Meets Federal specification TT-S-00230C, Type II.
• Meets ASTM C920, Type S, Grade NS.
• Meets CAN CGSB-19.13-M87.
• Meets CFIA requirements for incidental food contact.

Colour

White, Capitol Tan, Limestone, Aluminium Grey, Dark Bronze

Packaging

300 mL (10.1 US fl. oz) cartridge (12/case)

Use

Sikaflex® Crack Flex Sealant is used to seal horizontal cracks up to 25 mm (1 in) wide in concrete and cementitious slabs, such as:

• ƒƒDriveways
• Garages
• Sidewalks
• Balconies
• Pavements
• Terraces
• Decks
• Walkways
• Steps

Characteristics and Advantages

• ƒƒ1-component, no mixing, ready-to-use
• Self-levelling
• Textured to blend with concrete surface
• Elastic technology allows for crack movement
• Waterproof
• Paintable with water-, oil- and rubber-based paints.
• Resists aging and weathering
• Convenient; use with standard caulk gun

Colour

Grey

Use

• Designed for all types of joints where maximum depth of sealant will not exceed inch.
• Suitable for vertical and horizontal joints; readily placeable at 4°C (40°F).
• Has many applications as an elastic sealant between materials with dissimilar coefficients of expansion.
• Ideal for:
  Weatherproofing of joints between brickwork, blockwork, masonry, wood and concrete or metal frames.
  Joints in walls, balconies, around window or door frames.
  Expansion joints.

Characteristics and Advantages

• Excellent adhesion – bonds to most construction materials without a primer.
• Textured appearance blends well to rough or stucco type surfaces.
• Hides imperfections from tooling that a smooth sealant does not.
• Excellent resistance to aging, weathering.
• Non-staining.
• Paintable with water-, oil- and rubber-based paints.
• High elasticity – cures to a tough, durable, flexible consistency with exceptional cut and tear-resistance.
• Stress relaxation.
• Urethane-based; suggested by EPA for radon reduction.

Colour

Limestone

Packaging

Disposable 300 mL (10.1 US fl. oz) moisture-proof composite cartridges, 24/case.

Use

• Weatherproofing joints, cracks and gaps in concrete, brickwork, blockwork, masonry, stucco and metal.
• For all types of joints and cracks where maximum depth of sealant will not exceed 13 mm (½ in).
• Suitable for vertical and horizontal applications.
• As an elastic sealant between materials with dissimilar rates of expansion and contraction.
• Joints in walls, floors, balconies and around window or door frames.
• Waterproofing of expansion joints and joints or intersections in roofs.

Characteristics and Advantages

• Excellent adhesion – bonds to most construction materials without a primer.
• High elasticity – cures to a durable, flexible consistency with exceptional cut and tear-resistance.
• Stress relaxation to prevent splitting at edges.
• Capable of ±25% joint movement.
• Non-staining, protecting architectural and decorative materials from spoiling.
• Urethane-based; suggested by EPA for radon reduction.
• Paintable with water-, oil- and rubber-based paints.
• Excellent resistance to aging, weathering.
• Meets Federal specification TT-S-00230C, Type II.
• Meets ASTM C920, Type S, Grade NS.

Colour

Limestone

Packaging

300 mL (10.1 US fl. oz) moisture-proof and disposable composite cartridges, 12/case.