Flooring Products

VOC emission testing (tests in emission chamber, as per CDPH Standard Method v1.1 - 2010) by third-party laboratory is underway. Here are the products that have already been tested and that currently meet the requirements of this credit (tests results available upon request)

 

Note: Testing is currently underway for other Sika flooring products. Test results are expected August/September 2018. In the meantime, we do invite you to contact Sika Canada for additional information.

 

To learn more about the LEED v4 initiatives, please consult our information page.

 

Sikafloor®-511

Sikafloor® -511 is a two-component, solvent-free, high solids, low VOC low-viscosity, high strength, UV resistant, polyaspartic urethane coating system. Sikafloor® -511 is designed to be installed as a clear, glossy topcoat over decorative multicoloured quartz or flake broadcast systems where a fast cure, flexible, UV resistance finish coat is necessary. Sikafloor® -511 is available in clear or pigmented with Sikafloor® SCO Color Additive or Sikafloor® Metallic FX powders to achieve a variety of colors.

Sikafloor®-315 N

Sikafloor® 315N is a high solids, low VOC, low odour, highly abrasion resistant aliphatic polyurethane coating. This high performance resin contains a unique UV blocker technology that provides superior ultra violet light screening properties that significantly improves colour retention values of underlying resin floor systems. It has excellent clarity when applied as a two part clear high gloss smooth coating or as a three part semi-gloss fine aggregate textured finish with the addition of prepackaged optional wear aggregate.

Sikafloor®-156

Sikafloor®-156CA is a two-component, solvent-free, low-viscosity, high-strength, epoxy resin, used as an epoxy primer and binder for Sikafloor® Systems.

Sikafloor®-31 PurCem®

Sikafloor® -31 NA PurCem® is state-of-the-art, high-build coating with a matte finish, based upon pthalate-free, water dispersed polyurethane/cement and aggregate technology applied at 10 mils per coat. It is designed as a standalone coating for concrete, as primer/sealer for Sikafloor® -24 NA PurCem® and as a top coat for Sikafloor® PurCem® broadcast textured systems. It is an economical and versatile material that improves adhesion and mitigates outgassing of substrates as a primer, while providing excellent chemical resistance properties and very good durability against abrasion and mechanical damage. Sikafloor® -31 NA PurCem® represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.

Sikafloor®-33 N PurCem®

Sikafloor®-33 NA PurCem® is state-of-the-art, high-build coating with a matte finish, based upon pthalate-free, water dispersed polyurethane/cement and aggregate technology applied at 10 mils per coat. It is designed as a standalone coating for concrete and as a top coat for Sikafloor® NA PurCem® systems. It is new technology that significantly improves colour fastness, virtually eliminating the yellowing commonly associated with light coloured, conventional PUC products. It also provides a higher performing sealed surface with excellent chemical-, very good abrasion, and enhanced
mechanical-resistance. Sikafloor®-33 NA PurCem® represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.

Sikafloor®-261

Highly Versatile, Epoxy Resin Binder for Floor Finish Systems.

Sikafloor®-305 W

Sikafloor® 305 W is a two-component, water-based and low VOC containing polyurethane resin. It is used as matte finish, coloured seal and top coat for flexible membrane systems, including Sika ComfortFloor® and ComfortFloor® Pro systems