Wall Coating

Sikagard®-150 N Duroplast®

Sikagard® Duroplast®-150 N is a two-part, high solids, low odour, low VOC, fine-textured, pigmented, water-based epoxy wall coating. It produces a durable, easy to clean ceramic-like finish on interior surfaces in a range of gloss levels. Sikagard® Duroplast®-150 N demonstrates superior UV resistance to colour change compared to traditional epoxy coatings. Can be applied over properly prepared and primed, concrete masonry, common steel, or gypsum board substrates. It is fully compatible as a system component (body coat and or top coat) in all Sikagard® Duroplast® epoxy wall coating systems. Sikagard® Duroplast®-150 N contains high performance resins that naturally inhibit the growth of bacteria, molds, mildew and fungi for the lifetime of the coating.

Sikagard® Duroplast-100 N

High gloss, high solids, low odur, low VOC, abrasion resistant, antimicrobial epoxy wall coating.

Sikagard® Duroplast EE

Sikagard® Duroplast® EE is a two-part, high performance blockfiller designed to prime and fill small pours and reduce surface irregularities on properly prepared walls and ceilings. It serves to fill voids on porous surfaces and improve both the adhesion and appearance of high quality Sikagard® Duroplast® finishes that will be exposed to high levels of moisture in service.

Sika® Duroplast 150

UV Resistant, High Solids, Low Odour, Water Based Epoxy Wall Coating three Gloss Levels: Matte, Satin and Gloss

Special Floor Tools

Glass-Fibre Based, Embedding Fabric for Sikagard® Duroplast Epoxy Resin F.R.S. (Fabric Reinforced Systems) for Walls and Ceilings