Vehicular Traffic Coatings

Sikalastic®-11 Pronto Primer

Sikalastic® -511 Pronto Primer is a two-part, medium viscosity, fast-curing primer based on reactive acrylic resins, for use with Sikalastic® Pronto systems.

Sikalastic®-18 Pronto Topcoat

Sikalastic® -518 Pronto Topcoat is a two-component, fast-curing, flexible seal coat based on PMMA resins, serving as the finish top coat of the Sikalastic® Pronto RB-5700 PUMA system.

Sikalastic®-32 Pronto

Sikalastic®-532 Pronto is a fast curing, elastomeric self-levelling binder based on polyurethane-modified reactive acrylic resins (PUMA), as part of the Sikalastic® Pronto RB-5700 PUMA system.

Sika® MT Primer

A two component, high-solids, red tinted, translucent epoxy primer. It has been specifically formulated to perform as a moisture-tolerant and adhesion promoting primer.

Sikalastic®-120 FS Primer

A two-components, high-solids, translucent epoxy primer. It has been specifically formulated to perform as an adhesion promoting primer for fast turn around applications.

Sikalastic®-220 FS

Sikalastic®-220 FS is a 100 % solids, epoxy binder used to protect Sikalastic®-390 Membrane and to provide durable antiskid surface properties by broadcasting oven-dried, quartz sand into the binder.

Sikalastic® Recoat Primer

Sikalastic® Recoat Primer is a two component, high solids, liquid-applied primer. Optional: Sikalastic® 700 ACL Accelerator (see separate data sheet).

Sikalastic®-390 Membrane

Sikalastic®-390 Membrane is a high quality, fast chemical curing, two-component, solvent-free, elastomeric and crackbridging polyurethane waterproofing membrane. It is part of the Sikalastic® Parking Deck Waterproofing System and the Sikafloor® Industrial and Decorative Flooring Systems.

Sikalastic®-710 NP Base

Sikalastic®-710 NP is a single-component, primerless, aromatic, moisture-cured, elastomeric polyurethane membrane intended for use as the waterproofing base coat for pedestrian and vehicular traffic bearing applications.

Sikalastic®-391 N

Sikalastic®-391 N is a 100 % solids, polyurethane binder used to protect Sikalastic®-390 Membrane and to provide durable anti-skid surface properties by broadcasting oven-dried, silica sand into the binder.

Sikalastic®-394

Sikalastic®-394 is a 100 % solids, aliphatic polyurethane binder and top coat that is specially formulated to refresh (as top coat) or to protect (as wear course) parking decks that are exposed to U.V. light. When installed as a wear course over Sikalastic®-390 Membrane, the anti-skid finish is obtained by broadcasting oven-dried, silica sand into the binder.

Sikalastic®-8200

Low Modulus, High Strength, Moisture-Insensitive, Modified Epoxy Resin for Skid-Resistant Concrete verlays and Patching Mortars  

Sikalastic®-735 AL

Sikalastic®-735 AL and Sikalastic®-736 AL Lo-VOC are coatings formulated to be used as topcoats for the Sikalastic®-710 NP in exposed or uncovered areas (See Sikalastic®-710 NP Product Data Sheet). They are intended to be used as wear coats and as a decorative finish option for pedestrian and light vehicular trafficked surfaces.

Sikadur®-22 Lo-Mod

Sikadur®-22 Lo-Mod FS is a two-component, 100% solids, moisture-tolerant, fast setting epoxy resin binder. It conforms to the current ASTM C881 and AASHTO M 235 specifications.