Agricultural and Construction Vehicles

Sika® Handclean

Sika Hand Cleaner is a unique, patented, waterless, citrus-scented hand cleaning system combining both a high-quality liquid hand cleaner formula and a heavy-duty, non-scratching abrasive hand-cleaning towel. Sika Hand Cleaner's unique properties work fast to remove fresh urethane and primer, small amounts of cured urethane and dried primer, and loosens and dissolves surface and embedded grease, grime and soil. Hands are left fresh, clean and residue-free, without rinsing or drying.

Sika® Remover-208

Sika® Remover-208 is used to re-move traces of Sikaflex® products as well as for cleaning painted substrates. Sika® Remover-208 is manufactured in accordance with ISO 9001/14001, quality assurance system.

Foam Spacer Tape

Sika Spacer Tape is a closed-cell copolymer foam coated on both sides with an aggressive acrylic adhesive system for optimum compatibility to a variety of substrates. Sika Spacer Tape is constructed with a cellular structured foam that is particularly resistant to weathering and water absorption, while providing a superior long-lasting seal.

Sika® Tooling Agent N

Sika Tooling Agent N is a water-based, solvent-free tooling agent for use with Sikaflex adhesives and sealants.

SikaCure®-4900

SikaCure-4900 CA is the approved curing agent for waterborne dispersion adhesives. To provide good visual control of the mixing process, SikaCure-4900 CA is blue. SikaCure-4900 CA increases both the cohesive strength of the adhesive film and its adhesion to the substrate. Simultaneously, there is a significant improvement in cycling exposures (resistance against temperature and humidity).

SikaFast®-3131

SikaFast-3131S is a flexible, two-component acrylic adhesive designed to efficiently transfer high loads and evenly distribute stresses. These characteristics distinguish SikaFast-3131S from other acrylic adhesives that claim high strength and elongation. SikaFast-3131S bonds many materials without surface preparation or priming and cures rapidly at room temperature.

SikaFast®-5215

SikaFast-5215 NT is a fast-curing (5 minute Open Time), flexible 2-component adhesive system. It is based on ADP, Sika’s polymer technology, derived from acrylic chemistry. Uncured, SikaFast-5215 NT is a pasty, non-sagging, non-flammable material which allows an easy and precise application.

Sikaflex®-221

Sikaflex-221 is a high-quality, multi-purpose, non-sag 1-component, polyurethane sealant that cures on exposure to atmospheric humidity and forms a durable elastomer.

Sikaflex®-252

Sikaflex-252 is a 1-component, moisture-cured, polyurethane adhesive with extremely high thixotropy and high strength. Sikaflex-252 is particularly suited to bonding applications in the manufacture of trucks, trailers and equipment.

Sikaflex®-254

Sikaflex-254 is a non-sag, 1-component polyurethane adhesive that cures with the aid of Sika Booster (cure accelerator), or, alternatively, on exposure to atmospheric humidity, to form a durable elastomer.

Sikaflex®-265

Sikaflex-265 is a high-performance, elastic, gap-filling, one-part polyurethane adhesive that cures on exposure to atmospheric moisture to form a durable elastomer.

Sikaflex®-521 UV

Sikaflex-521 UV is a multi-purpose, non-sag, elastic, 1-component sealant based on a polyurethane-hybrid compound, that cures on exposure to atmospheric humidity to form a durable elastomer.

Sikaflex®-552

Sikaflex-552 is a high-performance, elastic, gap-filling, 1-component structural assembly adhesive that cures on exposure to atmospheric humidity and forms a durable elastomer. Sikaflex-552 does not contain isocyanate.

SikaForce®-7780

SikaForce®-7880 L05 is a two-component flexible bonding and filling compound. It consists of a filled polyol-based resin and an isocyanate-based hardener. The extruded mixture is initially liquid, but attains high non-sag properties after 3 minutes. It is applicable for a further 9 minutes. Due to the rapid cure, assembled parts can sustain high loads after a short time. The two components are processed manually or by means of suitable metering and mixing equipment. SikaForce®-7780 L05 is manufactured in accordance with the ISO 9001/14001 quality assurance system.

SikaForce®-7780 L12

SikaForce-7780 L12 CA is a two-component, flexible bonding and filling compound which consists of a filled polyol-based resin and an isocyanate-based hardener. The extruded mixture is initially liquid, but attains high non-sag properties after 3 minutes. Due to its rapid cure, it must be applied within the first 9 minutes of mixing. The assembled parts can bear a load soon after, thanks to the high cure speed. The components are processed manually or by means of suitable metering and mixing machines.

SikaSense®-4300

SikaSense-4300 FD CA is a ready-to-use, waterborne PUR dispersion contact adhesive with high initial strength and very good resistance against plasticizers; it offers a short drying time in combination with a very long open time. SikaSense-4300 FD CA , in combination with the curing agent, SikaCure-4900 CA , is a high quality laminating adhesive with especially good resistance to heat and water.

Sika® Aktivator-100

Sika® Aktivator is an activating agent, designed to improve adhesion. It is specifically formulated for the treatment of bond faces in direct glazing work prior to application of various Sika polyurethane adhesives.