Products for Decorative Coatings

  • SikaTop® Seal 107 CA

    Flexible, Waterproof and Protective Slurry Mortar

     

    Use

    • On horizontal surfaces subject to light foot traffic, such as balconies.
    • To waterproof concrete drinking water tanks, reservoirs, and clearwells.
    • For internal and external, horizontal and vertical water- and damp-proofing of concrete, mortar, blockwork and brickwork.
    • For protection of concrete structures against the harmful effects of de-icing salts and freeze/thaw cycles.
    • For sealing static hairline cracks in concrete structures not subject to movement.
    • For interior and exterior waterproofing of basements.
    • To protect rigid, extruded polystyrene foam.

    Characteristics and Advantages

    • Improves the watertightness of water-containing concrete tanks, reservoirs, and clearwells.
    • Protects against water penetration, while being water vapour permeable (breathable).
    • Excellent freeze/thaw resistance.
    • Good adhesion to sound, prepared substrates.
    • Mixing and application is fast and easy.
    • Good abrasion resistance.
    • Protects against concrete carbonation; 2 mH25m (80 mils) of SikaTop Seal 107CA is equivalent to 150 mm (6 in) of concrete.
    • Formulated with inert, non-reactive aggregates to eliminate potential Alkali-Aggregate Reactivity (AAR).
    • Can be mixed to slurry or trowelable consistency.
    • Improves concrete/masonry appearance.
    • NSF/ANSI Standard 61 approved for potable water (special order only).

    Colour

    Concrete Grey

    Packaging

    18 kg (39.6 lb) kit
    Yields 9 L (2.4 US gal.) of slurry

    Product Data Sheet

    SikaTop Seal 107 CA

    Material Safety Data Sheet

    SikaTop Seal 107 CA
  • Sikalastic® 180/181 CA

    Elastomeric and UV Resistant, Polyurethane-Based Balcony and Walkway Waterproofing System

     

    Use

    Use as a smooth or slip resistant coating to waterproof and protect concrete balconies, terraces, footbridges and stairways.

    Characteristics and Advantages

  • Easy to apply, typically self-priming and cost-effective.
  • Applied in a 2 or 3 step process for rapid turn around.
  • Waterproof, weather resistant and impervious to chlorides.
  • Highly elastic, crack bridging.
  • UV resistant, non-yellowing.
  • Abrasion resistant.
  • Smooth or slip-resistant surface.
  • Colour

    Concrete Grey, Dark Grey, Beige

    Packaging

    SikalasticCA 180: 18.9 L (5 US gal.) pail
    SikalasticCA 181: 18.9 L (5 US gal.) pail

Product Data Sheet

Sikalastic 180/181 CA

Material Safety Data Sheet

Sikalastic 180/181 CA
  • Sikagard® Natural Look Clear Sealer

    Water-Based, Low VOC Containing, Water Repelling and Salt Screening Silane/Siloxane Sealer for Concrete, Mortar, Masonry and Stone

     

    Use

    • Use as a water repellent and salt screening treatment to horizontal and vertical surfaces.
    • Exposed aggregate concrete, concrete or clay pavers, parapets, curbs, piers and walls.
    • Use on new or existing substrates which may be subject to freeze/thaw damage or deterioration as a result of chlorides.

    Characteristics and Advantages

    • Easy to prepare and use, no dilution or mixing required.
    • Low odour and low VOC content (38.5 g/L).
    • Simple application by brush roller or spray.
    • Can be applied to concrete after just 7 days cure.
    • Highly penetrative, leaves no surface film.
    • Chemically reacts with substrates to form an integral barrier.
    • Resists accumulation of dirt and growth of fungi and moss.
    • Long lasting water, chloride and free thaw resistance.

    Colour

    Milky white, clear when dry

    Packaging

    3.78 L (1 US gal.) jug
  • Sikagard® High Gloss Clear Sealer

    Water-Based, Low VOC Containing, Weather, Water and Salt Resistant Acrylic Sealer for Concrete and Masonry

     

     

    Use

    ■ Use as a moisture repellent and salt screening treatment to horizontal and vertical surfaces.
    ■ Concrete, brick or block sidewalks, steps, patios, porches, garages, driveways, and basement floors.
    ■ Use on new or existing surfaces which may be subject to weathering and freeze/thaw damage or deterioration as a result of chlorides.

    Characteristics and Advantages

    ■ Water-based with mild latex-type odour and low VOC content.
    ■ Easy to prepare and use, no dilution or mixing required.
    ■ Simple application by brush, roller or spray.
    ■ ‘Milky’ when wet for visibility of application and coverage.
    ■ Creates high gloss sheen resistant to mild corrosives and harmful substances.
    ■ Resists moisture penetration and helps reduce dusting and staining.
    ■ Long lasting chloride and free/thaw resistance.

    Colour

    ‘Milky’ white while wet, clear gloss when dry. Gloss level is good to very good depending on surface porosity and number of coats.

    Packaging

    3.78 L (1 US gal.) jug

  • Sika® Florseal WB 18 & 25

    Water-Based Acrylic Concrete Cure and Seal

     

    Use

    • For application on vertical, horizontal, smooth or textured, concrete substrates.
    • Suitable for curing and sealing plain concrete and concrete surfaces treated with non-metallic, dry shake floor hardeners and topping courses.
    • Suitable for interior or exterior concrete floors, pavements, sidewalks and structures. UV stable.
    • Applications to existing concrete surfaces as economical, water clear, protective sealing treatments.
    • Applications where solvent-based products cannot be used because of health and safety reasons.

    Characteristics and Advantages

    • Excellent moisture retention produces a durable concrete surface through optimum curing.
    • Reduces dust on new and existing concrete substrates by forming a durable film that seals the surface.
    • Protective sealer that resists some mild acids, alkalis and oils that may damage concrete.
    • Increases stain resistance and cleanability by sealing the surface pores.
    • Protects against damage from sudden rainfall.
    • Easy application, one coat effectively cures and seals concrete surfaces. No additional burlap or polyethylene sheeting is required.
    • Sika Florseal WB 25 passes the adhesion requirements of ASTM C1315 Type 1, Class A standard that evaluates the compatibility of the sealer with common adhesives. Specifically, ceramic tile adhesives to the requirements of specification ANSI A136.1-1992 and vinyl tile adhesion to the Resilient Floor Covering Institute specification ADH-1.
    • Canadian Food Inspection Agency acceptance.
    • Ministère des Transports du Québec acceptance.

    Colour

    Water Clear

    Packaging

    18.9 L (5 US gal.) pail
    208 L (55 US gal.) drum

    Product Data Sheet

    Sika Florseal WB 18 & 25

    Material Safety Data Sheet

    Sika Florseal WB 18Sika Florseal WB 25