Product Data Sheet Safety Data Sheet Show all documents
SikaHyflex®-150 LM

SikaHyflex®-150 LM

ONE-PART, LOW MODULUS, HYBRID SEALANT

SikaHyflex®-150 LM is a premium-grade, high movement, fast-curing, one-component, non-sag, elastomeric, hybrid sealant. Meets ASTM C920, Type S, Grade NS, Class 50, use NT, M, A, G, O.

  • Fast skin formation time allowing to over-paint early after application
  • Multi-purpose sealant bonding to many types of substrates
  • Superior UV resistance and weathering offering excellent durability
  • Excellent colour retention (white stays white) allowing to maintain an attractive look
  • Non-staining thus preserving aesthetics and appearance of substrate exposed surfaces
  • Very low VOC 
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • For joints or gaps connecting dissimilar substrates, such as: vinyl to concrete, aluminium to EIFS.
  • Window perimeter
  • Expansion joints
  • Curtain wall construction
  • For applications requiring both paintability and adhesion to non-porous substrates
  • When easy cold weather application is desired
 

Advantages

  • Fast skin formation time allowing to over-paint early after application
  • Multi-purpose sealant bonding to many types of substrates
  • Superior UV resistance and weathering offering excellent durability
  • Excellent colour retention (white stays white) allowing to maintain an attractive look
  • Non-staining thus preserving aesthetics and appearance of substrate exposed surfaces
  • Very low VOC 

Packaging

600 mL Uni-pac sausage

Colour

Aluminium grey, Limestone, Off-white, White and other colours available upon demand

Product Details

Product Information

Shelf Life

1 year

Storage Conditions

Store at temperatures between +5 °C and +27 °C, 50 % R.H. Condition Material to 18 °C - 23 °C before using.

Volatile organic compound (VOC) content

12 g/L
Technical Information

Shore A Hardness

27

(ASTM C661)

Elongation

1000 %

(ASTM D412)

Adhesion in Peel

Aluminium

6.2 N/mm

Glass

5.9 N/mm

Concrete

5.4 N/mm

Movement Capability

± 50 %

(ASTM C719)

Resistance to Weathering

Excellent

Colour Stability

Stain and colour change: None

(ASTM C510)

Service Temperature

-40 °C to +76 °C

Application

Application Information

Ambient Air Temperature

4 °C - 37 °C. Sealant should be installed when joint is at mid-range of its anticipated movement.

Tack-free time

< 1 h

(ASTM C679)
Consumption

Yield

600 mL Uni-pac sausage seals 7.3 linear metres of 13 mm x 6 mm joint.
Application steps

SUBSTRATE PREPARATION

The substrate must be clean, dry, frost-free, sound and free of any oils, greases or incompatible sealers, paints or coatings that may interfere with adhesion.

 
Porous substrates: Clean by mechanical methods to expose a sound surface free of contamination and laitance.

Non-porous substrates: For cleaning non-porous substrates, use ''two rag wipe'' method combined with alcohol, xylene or an approved commercial solvent. Allow solvent to evaporate prior to sealant application.

  

Priming

SikaHyflex®-150 LM is designed to obtain adhesion without the use of a primer; however, certain substrates may require a primer. Test by applying the sealant and/or primer sealant combination to confirm results and proposed application methods. In the situation where primer is needed on porous surfaces use Sikaflex® Primer-429. For non-porous surfaces, contact Sika Canada for proper recommendation.

CLEAN UP

Uncured material can be removed from equipment and tools using Sika® Urethane Cleaner and Thinner. Cured material can only be removed manually or mechanically. 

Documents