Product Data Sheet Safety Data Sheet Show all documents
Sika® Remover-208

Sika® Remover-208

Solvent-based cleaning agent

Sika® Remover-208 is a solvent-based colourless clear cleaning agent specially designed for use on non-porous, heavily contaminated surfaces in automotive applications. It is also used to remove traces of Sikaflex® products.  

  • Removes heavy contaminants
  • Suitable for most painted surfaces and plastics
 
Product Data Sheet Safety Data Sheet Show all documents

PRODUCT BENEFITS

  • Removes heavy contaminants
  • Suitable for most painted surfaces and plastics
 

Usage

  • Sika® Remover-208 is used to pre-clean heavily contaminated non-porous substrates and to clean painted surfaces prior to bonding.
  • Sika® Remover-208 can also be used to remove uncured excess of Sikaflex® adhesive or sealant from application tools or soiled surfaces.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.  

Advantages

  • Removes heavy contaminants
  • Suitable for most painted surfaces and plastics
 

Packaging

Drum200 L
Can

1 L

Product Details

Typical Product Data
Chemical base

Solvent-based

Colour (CQP001-1)

Colourless, clear

Application temperature

5 °C ─ 40 °C 

Application method

Wipe-on, wipe-off with lint-free paper towel

Shelf life

24 months A

CQP = Corporate Quality Procedure

A) stored in sealed container in up-right position in a dry place at ≤ 25 °C 
Technical Information

IMPORTANT NOTE

  • Compatibility with the actual substrate is to be verified prior the application.
  • Discard any Sika® Remover-208 that looses its clear appearance (contaminated).
 

Application

Application Information

Removal of uncured material

Remove the bulk of the Sikaflex® residue with a knife or spatula. Moisten a rag or towel with Sika® Remover-208 and wipe off the remaining adhesive or sealant.

Surface Cleaning

Wipe painted surfaces with a moistened rag or towel with Sika® Remover-208. Wet the paper towel with solvent by pouring the liquid onto the cloth. Never dip the paper towel into the Sika® Remover-208 as it may contaminate it! Wipe the surface with the wetted paper towel. Use fresh paper towels regularly in order to retain the cleansing power. Before the solvent dries on the surface (evaporates), wipe it off with a clean, dry, lint-free paper towel. Repeat the last two steps until no contaminants show up on a white paper towel. Do not use on sensitive surfaces such as fresh paints. Tightly reseal container immediately after each use.

Documents