Product Data Sheet
Show all documents
SikaForce®-803 L45

SikaForce®-803 L45

Two-component flexible polyurethane-based structural adhesive

SikaForce®-803 L45 is a flexible, structural, 2-component polyurethane adhesive, which cures at room temperature. It is designed for bonding large composite or coated metal components with stable properties over large temperature span. The adhesive combines long open time with fast curing and strength build-up. While uncured, it has very good non-sag and compressibility behavior.  

  • Combination of structural properties and flexibility
  • Stable mechanical properties over wide temperature range
  • Combining long open time with fast curing for large assemblies
  • Good non-sag behavior
  • Excellent compressibility
  • Accelerated curing at higher temperature
  • Does not contain solvents or PVC
 
Product Data Sheet
Show all documents

PRODUCT BENEFITS

  • Combination of structural properties and flexibility
  • Stable mechanical properties over wide temperature range
  • Combining long open time with fast curing for large assemblies
  • Good non-sag behavior
  • Excellent compressibility
  • Accelerated curing at higher temperature
  • Does not contain solvents or PVC
 

Usage

SikaForce®-803 L45 is suitable for structural elastic bonding of composites (e.g., CFRP, GFRP) or coated metals in transportation and general industry.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.  

Packaging

SikaForce®-803 L45 (A+B)

Dual cartridge

400 mL

Mixer: Sulzer MixPacTM MFQ 08-32D

SikaForce®-803 L45 (A)

Pail

23 L

SikaForce®-803 (B)

Pail

23 L
 

Product Details

Typical Product Data
Properties

SikaForce®-803 L45 (A)

SikaForce®-803 (B)

Chemical base

Polyol

Isocyanate

Colour (CQP001-1)

Black

Black

Density (uncured)

 

mixed (calculated)

1.24 g/cm3

1.21 g/cm3

1.23 g/cm3

Mixing ratio

by volume

by weight

1:1

1:1

Viscosity (CQP029-4)

at 10 s-1

90 Pa·s A

110 Pa·s A

Application temperature

15 °C ─ 30 °C

Open time (CQP046-11 / ISO 4587)

45 minutes B,C

Handling time (CQP046-11 / ISO 4587)

120 minutes B, C

Shore A hardness (CQP023-1 / ISO 48-4)

80

Tensile strength (CQP036-1 / ISO 527)

10 MPa B, D

Elongation at break (CQP036-1 / ISO 527)

300 % B, D

E-Modulus (CQP036-1 / ISO 37)

elongation 0.5 ─ 1 %

25 MPa B, D

Tensile lap-shear strength (CQP046-9 / ISO 4587)

10 MPa B, C, D

Glass transition temperature (CQP509-1 / ISO 6721)

-40 °C D

Shelf life

cartridge

pail

9 months E

12 months E

CQP = Corporate Quality Procedure

A) tested at 20 °C

B) 23 °C / 50 % r. h.

C) adhesive layer: 25 x 12.5 x 1.5 mm

D) cured for 1 week at 23 °CE) stored between 10 and 25 °C
Technical Information

CURE MECHANISM

SikaForce®-803 L45 cures by chemical reaction of the two components at room temperature. Higher temperatures accelerate the cure rate and decrease the open time. High humidity reduces the open time as well.

After the open time is reached, the cure reaction proceeds very fast and the viscosity will increase significantly within minutes. The faster the parts are assembled, the faster the adhesion builds up.

CHEMICAL RESISTANCE

In view of potential chemical or thermal exposure, it is required to conduct a project related testing.

Application

Application Information

Surface Preparation

Surfaces must be clean, dry and free from grease, oil and dust. Additional surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond. All pre-treatment steps must be confirmed by preliminary tests on original substrates considering specific conditions in the assembly process.

Application

Cartridge: Extrude adhesive without mixer to equalize the filling levels. Attach the mixer and dispose of a bead of at least the length of the mixer prior to the application.

SikaForce®-803 L45 shall be dispensed from dual cartridges by pneumatic or electric piston guns. Pails are processed with adequate 2-component equipment.

If dispensed with 2-component equipment, the mixer needs to be tailored for the specific application.

 

For advice on selecting and setting up a suitable pump system, contact Sika Canada.

Removal

SikaForce®-803 L45 may be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Hands and exposed skin have to be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water. Do not use solvents on skin.

STORAGE CONDITIONS

SikaForce®-803 L45 has to be kept at temperatures between 10 °C and 30 °C in a dry place. Do not expose it to direct sunlight or frost. After opening of the packaging, the content has to be protected against humidity. The lowest allowed temperature during transport is -20 °C for a maximum of seven (7) days.

Documents