King® PC-S6 UG35

12 months in original, unopened packaging 

Store dry, ensuring that product is not exposed to rain, condensation or high humidity.

2375 kg/m³ (148 lb/ft³)

King® PC-S6 UG35 RT : 4 hours 

Data was obtained under laboratory conditions with material and ambient temperatures of 21 °C (70 °F). Higher or lower temperatures can respectively reduce or increase slump and pot life.

• Approx. 0.014 m³ (0.5 ft³) / 30 kg (66 lb) bag
• Approx. 0.45 m³ (16.5 ft³) / 1000 kg (2205 lb) bag  

Mix material at a maximum water:cement ratio of 0.5 [100 L (26.5 US gal.) per 1000 kg (2205 lb) FIBC]. Maximum slump should be 100 mm (4 in). For mixing instructions, follow recommendations of concrete mixer manufacturer.

Place material uniformly and consolidate by vibrating. Ensure material has completely encapsulated any rebar or welded wire mesh.

Refer to ACI 304 R “Guide for Measuring, Mixing, Transporting and Placing Concrete”. Any formwork should be rigid and tight to prevent loss of material. For forming applications, refer to ACI 347, “Recommended Practice for Concrete Formwork”. 

OPTIMUM PERFORMANCE

• King® PC-S6 UG35 can be mixed using a CCM 200 Continuous Mixer (contact a Sika Technical Representative for details)

• King® PC-S6 UG35 can also be poured using a dry-mix shotcrete machine and a Separator Box (contact a Sika Technical Representative for details)

Good curing conditions are beneficial to optimizing physical properties. Although the high relative humidity commonly found in underground
environments provides for good curing conditions, additional curing is often appropriate and should be performed in accordance with ACI 308 “Standard Practice for Curing Concrete”.

Clean all tools and equipment immediately after use with water. Once hardened, material can only be removed mechanical