Product Data Sheet Show all documents
Sikaplan®-1200 Geotextile CA

Sikaplan®-1200 Geotextile CA

Geotextile for protection/separation — 1200 g/m2

Sikaplan®-1200 Geotextile CA is a 1200 g/m2 polypropylene (PP), non-woven geotextile. It is used as a protection or separation layer beneath underground or tunnel waterproofing sheet membranes.

  • High level of protection
  • Made of virgin material
  • Part of the complete waterproofing membrane system
  • Highly resistant to ageing
  • High tensile strength and elongation
  • Resistant to natural aggressive substances in groundwater and soil
  • Suitable for contact with acidic (soft) water
  • Flexibile in cold temperatures
  • Can be installed on damp and wet substrates
Product Data Sheet Show all documents

Usage

As a surface levelling and protective geotextile layer under sheet waterproofing membranes, for use in tunnels, basement and other underground structures.  

Advantages

  • High level of protection
  • Made of virgin material
  • Part of the complete waterproofing membrane system
  • Highly resistant to ageing
  • High tensile strength and elongation
  • Resistant to natural aggressive substances in groundwater and soil
  • Suitable for contact with acidic (soft) water
  • Flexibile in cold temperatures
  • Can be installed on damp and wet substrates

Packaging

Roll dimensions: 2 x 20 m (width x length)

Rolls are wrapped in PE film.

Colour

White nonwoven geotextile fibres

Product Details

Product Information

Composition / Manufacturing

Polypoprylene

Shelf Life

5 years from date of production.
Sikaplan®-1200 Geotextile CA is susceptible to degradation by UV light and should not be exposed to sunlight for more than 3 months.

Storage Conditions

Sikaplan®-1200 Geotextile CA must be stored in original unopened and undamaged sealed packaging in relatively dry conditions and with temperatures between 0 °C and +35 °C. Store in a horizontal position, preferably off of the ground to prevent water ingress and subsequent absorption of water by the material. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging labels.

Thickness

Mean Value

Unit

Thickness under

2 kPa

8.00

mm

Mass per unit area

Mean Value

Unit

Tolerance

1200

g/m2

100

 
Technical Information

Resistance to Static Puncture

Static Puncture (CBR test)

Mean Value

Unit

Tolerance

16.0

kN

± 1.5

Resistance to Dynamic Perforation

(Cone drop test)

Mean Value

Unit

Tolerance

0.0

mm

± 0.0

Tensile Strength

Mean Value

Unit

Tolerance

Longitudical (MD)

75.0

kN/m

± 8.5

Transversal (CMD)

75.0

kN/m

± 8.5

Elongation

Elongation at Maximum Load

Mean Value

Unit

Tolerance

Longitudinal (MD)

85

%

± 16

Transversal (CMD)

95

%

± 18

Water Permeability

Normal to the plane

Mean Value

Unit

Tolerance

(h=50 mm)

15

L/(m2.s)

± 5

Opening Size

Mean Value

UnitTolerance
O90

65

μm

± 20.0

Resistance to UV Exposure

Not permanently UV stable.

Resistance to Weathering

Not resistant to permanent weathering.

Documents