Product Data Sheet Safety Data Sheet Show all documents
Sika® Stabilizer-313 MBF

Sika® Stabilizer-313 MBF

High range water reducing admixture

Sika® Stabilizer-313 MBF is a high range water reducing admixture that improves the performance of cemented paste fills in underground backfill operations. The product is well suited for a range of gold deposits (orogenic, quartz Iode hosted gold) as well as polymetallic base metals deposits.

  • Reduction of the cement content of to 30%
  • Reduction of CO2 emission associated to cement consumption
  • Strong water reduction of the paste mix
Product Data Sheet Safety Data Sheet Show all documents

Usage

Sika® Stabilizer-313 MBF can be used to : 
  • Optimize the cost performances of the paste fill mix by reducing binder content (cement, slag,fly ash)
  • Improve rheological properties of the cemented paste fill during the continuous mixing, pumping, and filling process
  • Enhance workability of the paste fill, allowing long transportation along paste lines at significantly lower water contents
  • Lower the paste yield stress at an increased overall solid content
  • Reduce pumping and line pressure within the reticulation system
  • Reduce the risk of blockages in the reticulation system
  • Improve in-situ compressive strenghts at the final stage
  • Reduce wear and tear of machinery, equipment and paste line
  • Reduce segregation and bleeding of the placed paste fill
  • Reduce shrinkage and permeability in hardened fill
 

Advantages

  • Reduction of the cement content of to 30%
  • Reduction of CO2 emission associated to cement consumption
  • Strong water reduction of the paste mix

Packaging

1040 L FIBC

Colour

Liquid / Clear, green

Product Details

Product Information

Shelf Life

12 months from production date

Storage Conditions

This product must be stored in original, unopenned and undamaged packaging in dry conditions as temperatures between 10 and 27ºC ( 50 and 80ºF). 

Always refer to packaging 

Density

1,08 KG / L
System information

Compatibility

Contact your Sika Canada Technical Sales Representative

Application

Consumption

Recommended Dosage

The recommended dosage is between 1 and 3% per weight of cement. It is recommended to use an automated continuous process liquid dispensing system; the admixture can then be added directly into the plant mixer. It is not recommended to use this product at a higher dosage than the specified maximum dosage, unless required otherwise and after the required tests have been carried out.
Application steps

CLEAN UP

Use personal protective equipment (chemical resistant goggles/gloves/clothing). Without direct contact, remove spilled or excess product and place in suitable sealed container. Dispose of excess product and container in accordance with applicable environmental regulations.

Documents