Product Data Sheet Show all documents
SikaProof® ExTape-100

SikaProof® ExTape-100

Self-adhesive tape for external jointing of the SikaProof® A+ waterproofing system

SikaProof® ExTape-100 is a self-adhesive tape based on a butyl adhesive for external jointing and detailing of the SikaProof® A+ membrane system. The tape is composed of a grey aluminium/PET carrier and a divided release liner.

  • High adhesion and sealing ability
  • Divided release liner for quick and easy installation
Product Data Sheet Show all documents

Usage

The product is used for:
  • Sealing external joints and details within the SikaProof® A+ membrane system.
Please note:
  • Do not use the Product in areas where it is permanently exposed to weathering or UV-light.
 

Advantages

  • High adhesion and sealing ability
  • Divided release liner for quick and easy installation

Packaging

6 rolls packed in one box.

Individual roll size: Length 20 m / Width 100 mm

Colour

Grey carrier coated with black butyl adhesive covered by divided white release liner.

Product Details

Product Information

Shelf Life

24 months from date of production

Storage Conditions

Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between + 5 °C and + 25 °C (41 °F and 77 °F).
Always refer to packaging.

Length

20 m

Width

100 mm

Thickness

1.0 mm

 
System information

System Structure

System Components

SikaProof® A+ sheet membranes

Application

Application Information

Ambient Air Temperature

Maximum

+35 °C (95 °F)

Minimum

+5 °C (41 °F)

Substrate Temperature

Minimum

+5 °C (41 °F)
Application steps

APPLICATION INSTRUCTIONS

IMPORTANT

Strictly follow installation procedures

Strictly follow installation procedures as defined in Method Statements, application manuals and working instructions which must always be adjusted to the actual site conditions.

IMPORTANT

Application by trained personnel

The application of this Product must only be carried out by an applicator that is trained or approved by Sika. The applicator must also be experienced in this type of application.

SUBSTRATE QUALITY

The contact surface is the light yellow SikaProof® membrane side. It must be dry, clean and free of any materials that could impair adhesion.

Application outside of specified application conditions

Note: Under certain circumstances, the Product can be applied in conditions other than the ones specified in this data sheet. However, this requires specific precautions and application methods.

  1. Contact Sika technical services for more information.

APPLICATION

  1. Remove the release liner
  2. Apply onto the yellow membrane side
  3. Press firmly using a pressure roller

         

Important note: The Product is not resistant to permanent UV exposure or weathering. Protect as soon as possible but not later than 90 days after application.

Documents