Floating Boat Dock In 3 Easy Steps
TIME: 2 hOURS
SKILL LEVEL: MODERATE
ESTIMATED COST: $20
DIY Floating Boat Dock using SikaBond Construction Adhesive
Looking to reinforce each plank on your boat dock prior to screwing them down? We have got the solution for you!
SikaBond Construction Adhesive is a flexible adhesive that will create a watertight seal and prevent any excess water from seeping between the boards that would normally cause them to lift over time from weathering. Keep reading for tips on how to use our product.
PRO Select Products Used
Supplies & Tools
- SikaBond Construction Adhesive
- Caulk Gun1/4 in.
- Board (For Spacing)
- Ulity Knife
- Cordless Drill & Screws
DIY Floating Boat Dock
Using a caulk gun, apply a generous amount of SikaBond Construction Adhesive along the top of each joist and gently position each board.
Gluing Down Boards
Using a caulk gun, apply a generous amount of SikaBond Construction Adhesive along the top of each joist and gently position each board.
DIY Floating Boat Dock using SikaBond Construction Adhesive
Once the adhesive is applied, add 6 screws to fully secure each board (2 screws per joist). Now you can enjoy your time on your dock!