Product Data Sheet Safety Data Sheet Show all documents
SAKRETE Concrete & Mortar Dissolver

SAKRETE Concrete & Mortar Dissolver

SAKRETE Concrete & Mortar Dissolver is a safe, environmentally-friendly, liquid alternative to aggressive acid concrete removers. SAKRETE Concrete & Mortar Dissolver can be used to remove cured cement, concrete, mortar or stucco from most surfaces.

  • Environmentally-friendly
  • Non-fuming
  • Non-corrosive
  • Non-hazardous to equipment
  • Easy to apply; just spray on
Buy In Store
Product Data Sheet Safety Data Sheet Show all documents

Usage

For removing cured cement, concrete, mortar or stucco from most surfaces. Dissolves cement off tools, trowels, molds, concrete saws, patios, wooden decks, concrete splashed siding, glass, vehicles and more!

Advantages

  • Environmentally-friendly
  • Non-fuming
  • Non-corrosive
  • Non-hazardous to equipment
  • Easy to apply; just spray on

Packaging

651 mL (22 oz) bottle

Documents

How-To Video

FAQ

How to remove stubborn areas from the application surface of before applying SAKRETE Concrete and mortar remover?

Multiple applications used in conjunction with mechanical means may be necessary for removing stubborn or thick, built-up areas. Rinse with cold water with a garden hose and pressure nozzle or use a high-pressure washer.

What to do if SAKRETE Concrete and Mortar Solvent evaporates?

If SAKRETE Concrete & Mortar Dissolver evaporates, a white residue will appear. DO NOT RINSE! Reapply SAKRETE Concrete & Mortar Dissolver to reactivate as needed until concrete has softened to a mush. On extra thick build-up, repeat cleaning directions until the build-up has softened.

How to prepare the surface before applying SAKRETE Concrete & Mortar Dissolver?

IMPORTANT: Never wet surface before applying this product. Completely saturate the area of hardened concrete to be removed with undiluted SAKRETE Concrete & Mortar Dissolver. Surface will turn white on contact, then darken. Allow to penetrate for 10 to 15 minutes. Then, reapply to the same area. Keep surface wet with SAKRETE Concrete & Mortar Dissolver. Concrete will begin to soften and release from the surface. Total time required is approximately 20 to 30 minutes.