Product Data Sheet Safety Data Sheet Show all documents
SAKRETE Concrete Crack Filler

SAKRETE Concrete Crack Filler

SAKRETE Concrete Crack Filler is a high grade, pourable crack filler for concrete surfaces. Ready to use, flowable, polymer repair material designed to fill and seal cracks in concrete up to 13 mm (1/2”) wide x 6 mm (1/4”) deep.

  • Flexible, durable material
  • Protect concrete surfaces against damaging freeze-thaw cycles
  • Ready-to-use
Buy In Store
Product Data Sheet Safety Data Sheet Show all documents

Usage

Ideal for cracks in concrete driveways, patios and walkways.

Advantages

  • Flexible, durable material
  • Protect concrete surfaces against damaging freeze-thaw cycles
  • Ready-to-use

Packaging

0.95 L (1 qt) bottle

Documents

FAQ

How does the SAKRETE Crack Fillers cure?

Allow to dry overnight between applications. Protect from rain and water for 24 hours. DO NOT apply any Portland cement-based products over top of the crack filler.
 

What is the yield of the SAKRETE Crack Fillers?

0.95 L (1 qt) bottle will fill a crack approximately: 10.6 m (35 ft) x 6 mm (1/4 in) x 13 mm (1/2 in).

What should be the width and depth of the cracks?

Maximum crack width of 13 mm (1/2 in), and maximum depth of 6 mm (1/4 in). Width to depth ratio should be 2 to 1.

How to set up the SAKRETE Crack Fillers?

Cut applicator tip to size needed for repair. Squeeze SAKRETE Concrete Crack Filler into cracks. Trowelling is not necessary. Deep cracks may require more than one application due to shrinkage during curing and will have extended drying times. Allow to dry overnight between applications.

How to prepare the surface before applying the SAKRETE Concrete Crack Filler?

Clean area and remove all loose concrete, grease, oil, paint, dirt, and any foreign materials that will inhibit performance.

What is the minimum application temperature of the SAKRETE Concrete Crack Filler?

Do not apply when temperatures are expected to fall below +10 °C (50 °F) within 24 hours.