Sika Boom® AS-PRO
Sika Boom® AS-PRO is an all season, multipurpose, gun-applied polyurethane foam
- May be applied year around at temperatures between -12 °C and 30 °C.
- Low expansion helps prevent bowing or warping of window frames and other elements.
- Convenient application and clean up with Sika Boom® PRO Dispenser gun and Sika Boom® PRO Cleaner.
- Environmentally Friendly: CFC and HCFC-free.
- Low VOC, less than 2.0 g/L (LEED - SCAQMD, Rule 1168).
- UL 723 Classified (ASTM E84), CAN/ULC-S102-10.
Usage
- Installation of window and door frames.
- Filling gaps and voids.
- Sealing out dust, noise and draft.
- Filling of penetration in walls.
- Air sealing and insulating.
Advantages
- May be applied year around at temperatures between -12 °C and 30 °C.
- Low expansion helps prevent bowing or warping of window frames and other elements.
- Convenient application and clean up with Sika Boom® PRO Dispenser gun and Sika Boom® PRO Cleaner.
- Environmentally Friendly: CFC and HCFC-free.
- Low VOC, less than 2.0 g/L (LEED - SCAQMD, Rule 1168).
- UL 723 Classified (ASTM E84), CAN/ULC-S102-10.
Packaging
750 mL (850 g) can / 12 cans per case
Colour
Light Yellow
FAQ
The colour is pale yellow.
Shake Sika Boom® AS-PRO can well for about 60 seconds before use. Repeat shaking after long interruptions of use. Remove the red tab from the top of the can. Turn Sika Boom® AS-PRO can upside down and screw onto the valve of the Sika® PRO Dispenser gun then gently press the trigger to purge any air from the gun before applying. The can must remain upside-down at all times while dispensing. The consumption can be regulated by applying more or less pressure on the trigger or by tightening or loosening the screw on the Sika® PRO Dispenser gun. Fill the cavity approximately 50 % to allow for expansion. Unfinished cans of Sika Boom® AS-PRO should be left on the gun so that they may be reused at a later time.
The curing time of the Sika Boom® AS-PRO is 24 hours. In addition, lower temperatures decrease yield and curing time.
40 L (± 5 L) , depending on temperature and humidity.
Unfinished cans should typically be used up within two (2) weeks.
Sika Boom® AS-PRO is environmentally friendly: CFC and HCFC-free.
It may be applied year around at temperatures between -12 °C and +30 °C