Sika Boom®-130 3XL
Sika Boom®-130 3XL is a one-component, triple expansion, CFC-free polyurethane foam specially formulated for large gap filling applications.
- High yield formulation
- Suitable for exterior and interior applications
- Excellent adhesion, stability and filling capacity
- High thermal and acoustical insulation values
- Adheres to most common building materials (concrete, wood, metal, glass, etc.)
- Mould-proof, waterproof and over-paintable
- Applicable at temperatures ranging between 5 and 30 °C
- No special tools required - includes convenient re-usable dispensing straw
- Cured foam becomes rigid when dried; can be trimmed, shaped and sanded
- Environmentally Friendly: CFC and HCFC-free
- Low VOC, less than 2 g/L
- CAN/ULC-S102-10 certification
Usage
- Filling and sealing of large gaps, joints and cavities
- Sealing around pipes, conduits and other wall penetrations
- Weather sealing and insulating against cold, air movement and drafts
Advantages
- High yield formulation
- Suitable for exterior and interior applications
- Excellent adhesion, stability and filling capacity
- High thermal and acoustical insulation values
- Adheres to most common building materials (concrete, wood, metal, glass, etc.)
- Mould-proof, waterproof and over-paintable
- Applicable at temperatures ranging between 5 and 30 °C
- No special tools required - includes convenient re-usable dispensing straw
- Cured foam becomes rigid when dried; can be trimmed, shaped and sanded
- Environmentally Friendly: CFC and HCFC-free
- Low VOC, less than 2 g/L
- CAN/ULC-S102-10 certification
Packaging
750 mL (850 g) can / 12 cans per case
Colour
Light Green
FAQ
The Product will not adhere to surfaces such as polyethylene, Teflon, silicone, and surfaces contaminated with oils, greases, mould-release agents, and other similar materials.
Sika Boom®-130 3XL is Environmentally Friendly: CFC and HCFC-free.
For best results, the cured foam may be painted or coated for outdoor applications.
Shake Sika Boom®-130 3XL can well for about 60 seconds before use. Repeat shaking after long interruptions of use. Turn the can upside-down and screw the straw adapter firmly into place without pressing the valve. Regulate the foam flow by applying more or less pressure on the valve/adapter. Note: Sika Boom®-130 3XL can only be used in the upside-down position; failure to invert the can will prevent the foam from dispensing properly.
Fill deep cavities in several layers. Take care to allow each layer to cure and expand sufficiently by spraying water between each layer or allowing sufficient waiting time between the layers. Fill the cavity approximately 30 % to allow for expansion. All building elements must be temporarily fixed until the foam has fully cured.
Sika Boom-130® 3XL should be stored and transported in a vertical position.
Sika Boom-130® 3XL can must be held used in the upside-down position for application; failure to do so will prevent the foam from dispensing properly.
Cured foam will discolour if exposed to ultraviolet light
Sika Boom-130® 3XL is suitable for exterior and interior applications
Low VOC, less than 2 g/LC
Weather sealing and insulating against cold, air movement and drafts.
Re-Usable Straw: To ensure that the straw can be reused: 1) set the can upright and 2) while it is still full of foam, fold back the straw over itself and slide the open end onto the plastic tip located above the trigger to a depth of 10 mm. This will keep the straw air-free. When you are ready to re-use the product, simply shake the can, unfold the straw and proceed with spraying.
No special tools required - includes convenient reusable dispensing straw