SikaSet® Plug
Use Sikaset® Plug to seal leaks and make permanent high strength repairs. Grey, non-hygroscopic, chloride-free powder, contains Sika’s exclusive organic accelerator.
- Ready to use powder requires only addition of water.
- Sets rapidly even when mix water temperature is at 4 °C (39 °F) and ambient temperature is at 2 °C (35 °F).
- Low-shrinkage Sikaset® Plug is highly resistant to sewage and sulfate attack.
Usage
- Seal leaks or makes quick masonry or concrete repairs.
- Floors, walls, sidewalks.
- For fast repair of pipe and other precast concrete products.
- Excellent for sewage and water treatment plant maintenance and repair.
Advantages
- Ready to use powder requires only addition of water.
- Sets rapidly even when mix water temperature is at 4 °C (39 °F) and ambient temperature is at 2 °C (35 °F).
- Low-shrinkage Sikaset® Plug is highly resistant to sewage and sulfate attack.
Packaging
1 kg (2.2 lb) bag, 6/carton
5 kg (11 lb) bag, 4/carton
22.7 kg (50 lb) pail
Colour
Concrete Grey
Product Details
Shelf Life
1 year in original, unopened packaging.
Storage Conditions
Store dry at 5 to 32 °C (41 to 89 °F), ensuring that product is not exposed to rain, condensation or high humidity.
Indicative Performance of Mortar Mix
Initial Set Time
90 - 130 sec | (ASTM C266) |
Compressive Strength
28 days | 30 MPa (4350 psi) |
Application
Consumption
Mixed as indicated below:
- 1 kg (2.2 lb) will yield approx 0.6 L (0.02 ft3) of mortar or 5 plugs;
- 5 kg (11 lb) will yield approx. 2.9 L (0.1 ft3) of mortar or 25 plugs;
- 22.7 kg (50 lb) will yield approx 13 L (0.45 ft3) of mortar or 113 plugs.
MIXING
Add 1 part by volume of potable water to 3 parts of SikaSet® Plug and mix to consistency of stiff putty. Use mixing water with temperature of 21 °C (70 °F). Set is slowed slightly at lower temperatures.
CLEAN UP
Remove SikaSet® Plug from tools and mixing equipment with water. Cured product can only be removed mechanically.
FAQ
SikaSet® Plug sets rapidly, even when mixed water temperature is at +4 °C (39 °F) and ambient temperature is at +2 °C (35 °F).
Add 1 part (by volume) of potable water to 3 parts of SikaSet® Plug and mix to consistency of stiff putty. Use mixing water at a temperature of +21 °C (70 °F). Set is slowed slightly at lower temperatures.
Sikaset® Plug is a ready-to-use powder that only requires the addition of water.
Prepare leaking areas by chipping away unsound concrete and forming a V shaped hole or slot. Use SikaSet® Plug to seal all adjacent seepage and slight leaks before plugging the largest leaks. For large leaks, form carrot-shaped plugs and wait until nearly hard before pushing into leak.
Trowel SikaSet® Plug on damaged precast members; knead into honeycombs with rubber-gloved hand. Seal container tightly after use.
For best results, condition the product to +18 to +29 °C (65 to 84 °F) prior to mixing and installation. Lower temperatures may result in slower strength development and longer cure times.
Mixed as indicated below:
- 1 kg (2.2 lb) will yield approx. 0.6 L (0.02 ft3) of mortar or 5 plugs.
- 5 kg (11 lb) will yield approx. 2.9 L (0.1 ft3) of mortar or 25 plugs.
- 22.7 kg (50 lb) will yield approx. 13 L (0.45 ft3) of mortar or 113 plugs.
SikaSet® Plug is excellent for sewage and water treatment plant maintenance and repair. Also, low-shrinkage Sikaset® Plug is highly resistant to sewage and sulfate attack.