Sika Boom® Cleaner
Powerful aerosol cleaner for regular cleaning of the Sika Boom® PRO Dispenser gun.
- Powerful solvent based easy to use aerosol can.
- May be used in all positions.
- May be used on its own or screwed onto the Sika Boom® PRO Dispenser gun.
- Environmentally Friendly: CFC and HCFC-free.
- May be used then stored for later use.
Usage
Sika Boom® PRO Cleaner is used to clean the Sika Boom® PRO Dispenser gun after use. It is for removing fresh uncured polyurethane foam residues from dispensing equipment, but may also be used to remove fresh uncured foam from other surfaces. Sika Boom® PRO Cleaner will also clean and remove grease from contaminated substrates.
Advantages
- Powerful solvent based easy to use aerosol can.
- May be used in all positions.
- May be used on its own or screwed onto the Sika Boom® PRO Dispenser gun.
- Environmentally Friendly: CFC and HCFC-free.
- May be used then stored for later use.
Packaging
500 mL (460 g) can / 12 cans per case
Colour
Clear
FAQ
Sika Boom® Cleaner may be used on its own or screwed onto the Sika Boom® Pro Dispenser gun.
Sika Boom® PRO Cleaner is used to clean the Sika Boom® PRO Dispenser gun after use. It is for removing fresh uncured polyurethane foam residues from dispensing equipment but may also be used to remove fresh uncured foam from other surfaces. Sika Boom® PRO Cleaner will also clean and remove grease from contaminated substrates.
Sika Boom® PRO Cleaner can partially dissolve or discolour sensitive substrates (e.g., Varnish, paint, plastics, and textiles). We recommend testing the compatibility and colour fastness discreetly on an unobtrusive area before every use.
Before dispensing, shake the can vigorously for 20 seconds to mix contents. Will not remove cured PU foam.
- Cleaning Sika Boom® PRO Dispenser gun: Mechanically remove any hardened PU residues, then screw the Sika Boom® PRO Cleaner can onto the dispenser gun and hold the trigger for at least 5 seconds allowing the solvent to flush through the gun adaptor, ensuring the dispenser tip is thoroughly cleaned. Repeat if necessary. Sika Boom® PRO Dispenser gun can then be stored attached to the Sika Boom® PRO Cleaner for some time. If stored without being attached to the Sika Boom® Cleaner, we recommend cleaning the dispenser gun thoroughly by repeating the cleaning process several times.
- Cleaning other surfaces: Attach the spray nozzle that comes with Sika Boom® PRO Cleaner and thoroughly apply to surfaces (including exterior of the dispenser gun body) to remove uncured PU foam. Wipe with a clean cloth to remove foam and residual material. Repeat if necessary.
The service temperature is between 0 °C to +30 °C and the application temperature is between +5 °C to +30 °C.
Up to 15 Sika Boom® PRO Dispenser gun cleaning
