Sika AnchorFix®-3001

High-Strength, High-Load Capacity and VOC-Free Pure Epoxy Anchoring Adhesive with Extended WorkingTime

  • Supplied as 1: 1 ratio in side by side cartridges.
  • Styrene- and VOC- free
  • Versatile material allows application as adhesive and anchoring gel.
  • Sets up in dry, wet or flooded conditions.
  • Cures down to 0°C (32°F) when material is conditioned to 5°C (41°F).
  • Cures without exhibiting expansion pressures.
  • Extended open and gel times accommodate anchoring in deep and scattered holes.
  • Permits anchors close to free edges.
  • Suitable for chemical anchors, threaded bars and reinforcing steel.
  • Performs in both cracked and non-cracked concrete
  • Resistant to a wide range of chemicals, including aqueous solutions of aluminum chloride at saturation, aluminium nitrate at 10% concentration, jet fuel, diesel fuel, domestic kerosene and many other substances at 75°C (167°F) while retaining at least 80% of physical values.(See Chemical Resistance Guide).
  • Supports high loads


  • ETAG 001:Part 1 approval pending.
  • ICC ES approved.
  • AC3608 ESR approved for cracked and uncracked concrete
  • IAPMO approved.