Product Data Sheet Show all documents

Sika® Antisol®-115

White pigmented curing compound 

Sika® Antisol®-115 is a liquid curing compound for the prevention of premature water loss in concrete. Sika® Antisol®-115 is sprayed onto newly concrete surfaces to form a thin film barrier against premature water loss. Without disturbance to the normal setting action, the concrete is then allowed to cure and achieve maximum properties.

  • Ready for use and easy to apply.
  • Water-based compound 
  • Minimized excessive surface shrinkage
  • Reduces the potential for plastic cracking
  • Improves the surface strength, abrasion resistance, and durability of the concrete
  • Low VOC content
Product Data Sheet Show all documents

Usage

Sika® Antisol®-115 is particularly useful in large areas of exposed concrete where a solar reflective membrane is preferred, such as:
  • Highways, runways and taxiways
  • Aprons and hardstandings
  • Bridges, tunnels
  • Concrete floors, pavements, sidewalks and structures
 

Advantages

  • Ready for use and easy to apply.
  • Water-based compound 
  • Minimized excessive surface shrinkage
  • Reduces the potential for plastic cracking
  • Improves the surface strength, abrasion resistance, and durability of the concrete
  • Low VOC content

Packaging

200 L (52.8 US gal) drum

Colour

Liquid / White

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Tested in accordance with ASTM C309, Type 2, Class A and B
Product Information

Composition / Manufacturing

Emulsified polyolefins, white pigments

Shelf Life

12 months, when stored in original, unopened containers

Storage Conditions

Store in dry and cool conditions, protected from direct sunlight, at temperatures between 4 °C and 32 °C (40 °F and 90 °F). Do not use product that has been frozen.

Density

Approx 1.0 kg/L (8.35 lb/US gal)

Volatile organic compound (VOC) content

30 g/L
Technical Information

Solar Reflectance

Daylight Reflectance

Pass

Water Retention

Water Loss (72 h)

Pass

Application

Application Information

Drying time

Pass

(ASTM C309)
Consumption

Consumption

4.9 m2/L (200 ft2/US gal)

Note: Coverage rates vary with surface texture and porosity, ambient and surface temperatures, method of application.
Application steps

MIXING

No mixing required. Sika® Antisol®-115 is a ready-to-use product. Stir well before use.

APPLICATION

Sika® Antisol®-115 has been designed for spray application using standard spraying equipment.

   

Sika® Antisol®-115 should be applied in a thin coat over the entire surface of freshly poured concrete, at a recommended rate of 4.9 m2/L (200 ft2/US gal), using a hand-held spray gun or other suitable spraying equipment. After application the treated surfaces are must be protected from rain for at least 2 – 3 hours.

  

Note: To prevent clogging, regular cleaning of jet sprays during application is recommended.

CLEANING

Clean all tools and equipment immediately after use with water. Cured product, material can be removed with xylene or mineral spirits.

Documents