Sika's cold liquid/fluid applied polyurethane roofing membranes products combine a moisture-triggered, single component, polyurethane resin with either Reemat Fiberglass or Polyester Fleece Reinforcement to create a highly conformable, self-adhering and self-terminating roofing/waterproofing membrane that is resistant to rainfall and ponding water within minutes of application.

Browse through our polyurethane liquid/fluid applied roofing products below to see which product best suits your next project!

Liquid Applied Membrane Products Categories

Liquid Applied to Membrane Floor

Polyurethanes

Liquid Applied Roofing Membranes/Fluid Applied Roofing Membranes are monolithic, fully-bonded, fluid-based coatings that create a rubber-like, elastomeric, seamless waterproofing membrane that has no cracks, gaps or voids that would allow the ingress of water.
Roofing insulation

Reinforcements

Reemat fiberglass mats are high tensile-strength reinforcing mesh that eliminates visible reinforcement overlaps and conforms to many flashing conditions without special cutting and fitting. Non-woven polyester fleece reinforcing mesh has a defined-thickness which allows a single-pass, wet-on-wet application, ideal for many flashing conditions with sharp bends and angles.
Sikalastic primer

Primers

Sikalastic RoofPro can be applied to a wide variety of substrates with the use of primers. Use the chart below to find the primers that best suit your project requirements.