Product Data Sheet Show all documents

Sarnafastener #12

THREADED DRILL POINT FASTENER

Sarnafastener #12 is a threaded drill point fastener used within Sarnafil® roof systems to attach Sarnatherm® insulation, Sarnatherm roof boards, gypsum roof boards, or other Sika approved boards into steel decking (18–24 gauge), wood plank [min.38 mm (1-1/2")], or wood sheathing [> 12 mm (15/32")].

  • Heavy shank & thread diameters
  • Deep buttress thread for high pullout resistance
  • Extra sharp spade point for quick installation in new or reroof applications
Product Data Sheet Show all documents

Usage

Used in conjunction with Sarnaplates for attachment direct to the roof deck. Areas of Application
  • New roof applications
  • Reroof applications
  • Recovers
 

Advantages

  • Heavy shank & thread diameters
  • Deep buttress thread for high pullout resistance
  • Extra sharp spade point for quick installation in new or reroof applications

Packaging

LengthThreadPackagingWeight

41 mm (1-5/8")

Full

1000 / Pail5.4 kg (12 lb)

57 mm (2-1/4")

Full1000 / Pail

7.3 kg (16 lb)

76 mm (3")

Full1000 / Pail

10.9 kg (24 lb)

102 mm (4")

76 mm (3")

1000 / Pail

12.7 kg (28 lb)

127 mm (5")

76 mm (3")

1000 / Pail5.9 kg (35 lb)
152 mm (6")

102 mm (4")

1000 / Pail

18.1 kg (40 lb)

178 mm (7")

102 mm (4")

1000 / Pail

21.8 kg (48 lb)

203 mm (8")

102 mm (4")

1000 / Pail

22.7 kg (50 lb)

* One #3 Phillips drive bit is included in each box.

Colour

Black

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Factory Mutual 4470
  • ICC Code Compliance – ESR 1157
  • Miami-Dade County
  • CSA-A123.21
Product Information

Composition / Manufacturing

Made from carbon steel, treated with a corrosion-resistant coating to meet the criteria for corrosion resistance.

Shelf Life

Not applicable

Storage Conditions

Not applicable

Dimensions

  • Thread Diameter: 5.6 mm (0.22")
  • Shank Diameter: 4.1 mm (0.16")
  • Head Diameter: 11 mm (0.435")
  • Head Style: #3 Phillips

Application

Application steps

APPLICATION

Sarnafastener #12 is fastened straight into the roof deck with a heavy duty (4 amp minimum), variable speed (0–2500 rpm), reversible screwgun with a clutch release and a #3 Phillips drive bit.

 

Sarnafastener #12 must penetrate steel decking and wood plank roof decks by 25 mm (1") and the underside of wood sheathing by 13 mm (1/2"). Care must be taken not to damage the roof deck. Choose the correct fastener length and do not overdrive or underdrive. Pullout tests are required prior to job start when used with existing wood sheathing roof decks for technical evaluation.

Documents