Product Data Sheet Show all documents
Sarnaplate

Sarnaplate

STRESS PLATE

Sarnaplate is a specially-designed stress plate used with #12, #14, and #15 Sarnafasteners to attach Sarnatherm® insulation, Sarnatherm® roof boards, gypsum roof boards, or other Sika approved boards directly to the roof deck prior to the installation of the Sarnafil® or Sikaplan® mechanically-attached or adhered roof membrane.

  • Dimensions: 75 x 75 mm (3 x 3 in) square
  • High-rib design to increase strength and to provide protection to the membrane underside from abrasion by the fastener head
  • Superior resistance to bending
Product Data Sheet Show all documents

Usage

Used with Sarnafasteners to attach insulation or roof boards direct to the roof deck.    Areas of Application
  • New roof applications
  • Reroof applications
 

Advantages

  • Dimensions: 75 x 75 mm (3 x 3 in) square
  • High-rib design to increase strength and to provide protection to the membrane underside from abrasion by the fastener head
  • Superior resistance to bending

Packaging

ƒƒPackaging: Boxes of 1000 units.
ƒƒShipping Weight: 20.4 kg (45 lb).

Colour

Grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Factory Mutual 4470
  • ICC Code Compliance – ESR 1157
  • Miami-Dade County
  • CSA-A123.21
Product Information

Composition / Manufacturing

0.46 mm (26 gauge) stamping of SAE 1010 steel with a Galvalume® coating

Shelf Life

Not applicable

Storage Conditions

Not applicable

Dimensions

Square: 75 mm (3 in) x 75 mm (3 in)
Round: 75 mm (3 in) diameter

 
System information

System Structure

Sarnaplate is positioned on the surface of the insulation board. A Sarnafastener is set through the center of it and drilled into the roof deck. The Sarnaplate clamps the insulation board in place.

Documents