Don’t take too much time away from your production...Discover our Fast Set Products

Sikafloor® NA PurCem® FS

An advanced generation of fast-set (FS), polyurethane/ciment screeds and mortars. Available in 6 different solutions

Advantages of this Fast Set Range: 

  • Can be applied onto 7 to 10 day old concrete
  • Faster set times make it ideal for quick turn around projects
  • Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents
  • Available colours: RAL 3009 Oxide Red, RAL 7038 Agate Grey, Sika® Medium Grey,  RAL 1001 Beige, RAL 5005 Signal Blue, Special colours (on request)

 

How fast is the PurCem FS ?

CURE TIME COMPARISON Regular version Sikafloor® NA PurCem®
Foot Traffic 18 hours
Light Traffic 24 hours
Normal Traffic 5 days
FAST-SET VERSION Sikafloor® NA PurCem® FS
7 HOURS
12 HOURS
4 DAYS 

Sikafloor-165 FS

High-Solids, adhesion promoting Fast-Setting Primer. 

Advantages

  • Very rapid overcoating time increases productivity, 2 hours 30 minutes at 23 °C (73 °F)
  • Low viscosity ensures excellent penetration and adhesion
  • User friendly mix ratio = 3:2 (parts by volume

How fast is the Sikafloor®-165 FS ?

Waiting Time / Overcoating  

Ambient & Substrate Temperature

Minimum Maximum

10 °C (50 °F)

~ 8 (hours) ~ 24 (hours)
23 °C (73 °F)

~ 2.5 (hours)

30 °C (86 °F)

~ 1.5 (hours)

 

~ 5 (hours)