Sikafloor®-31 NA PurCem®

Sikafloor® -31 NA PurCem® is state-of-the-art, high-build coating with a matte finish, based upon pthalate-free, water dispersed polyurethane/cement and aggregate technology applied at 10 mils per coat. It is designed as a standalone coating for concrete, as primer/sealer for Sikafloor® -24 NA PurCem® and as a top coat for Sikafloor® PurCem® broadcast textured systems. It is an economical and versatile material that improves adhesion and mitigates outgassing of substrates as a primer, while providing excellent chemical resistance properties and very good durability against abrasion and mechanical damage. Sikafloor® -31 NA PurCem® represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.

  • Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi).
  • Economical and easy installation requiring less labour to install than traditional Sikafloor® PurCem® materials.
  • Versatile material suitable for application as a primer, standalone coating and top coat for other PurCem systems.
  • Longer pot life permits increased productivity with less waste.
  • Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
    Consult Sika Technical Sales for full details. Refer to the Sikafloor® PurCem® Chemical Resistance Chart.
  • Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling.
  • Performs and retains its physical characteristics through a wide temperature range from -10°C
    (14°F) up to 90°C (194°F).
  • Superior formulation eliminates formation of blisters, such as those arising out of application during elevated temperatures or early and multiple layer applications.
  • Bond strength in excess of the tensile strength of concrete, concrete will fail first.
  • Non-taint, odourless and phthalate-free, avoiding associated toxicity to health and environmental hazards.
  • Behaves plastically under impact; deforms but will not crack or debond.
  • Excellent long term wear resistance from a two coat application.
  • Easily maintained using commonly employed methods and phenol free detergents.
  • Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth (special order grade)
  • Potential LEED® Canada Credits: IEQ 4.2- Low Emitting Material – Industrial Maintenance Coatings.
Sikafloor®-31 NA PurCem®